Timber Frame Moment Joints with Glued-In Steel Rods. II: Experimental Investigation of Long-Term Performance
- 1 June 2012
- journal article
- Published by American Society of Civil Engineers (ASCE) in Journal of Structural Engineering
- Vol. 138 (6) , 802-811
Abstract
The pull-out performance of steel rods glued into timber is well-documented, and short-term tests by many researchers have demonstrated reliable strength. The behavior of glued-in steel rods in moment-resisting beam-column joints is much more complex because of anisotropy of wood in the connection region, discontinuity of material at the interface, and the possible effects of creep of timber and stress concentrations on the joint performance. This paper describes the results of a series of long-term load tests on moment-resisting joints between glulam members and separate load tests on the various joint components, including the epoxy itself and the timber stressed perpendicular to the grain. Different types of knee joints, with rods fully epoxied along their length or epoxied only in one member and tensioned in the other, and with different geometries (with the beam extended over the column or with the column extended past the beam) were tested. Measurements were recorded to identify time-depende...Keywords
This publication has 7 references indexed in Scilit:
- Timber Frame Moment Joints with Glued-In Steel Rods. I: DesignJournal of Structural Engineering, 2012
- Long-Term Behavior of Prestressed LVL Members. II: Analytical ApproachJournal of Structural Engineering, 2011
- Long-Term Behavior of Prestressed LVL Members. I: Experimental TestsJournal of Structural Engineering, 2011
- Ductile moment-resistant steel–timber connectionsProceedings of the Institution of Civil Engineers - Structures and Buildings, 2011
- Ductile End Connections for Glulam BeamsStructural Engineering International, 2008
- Pull-out strength of axially loaded steel rods bonded in glulam parallel to the grainMaterials and Structures, 2006
- Wood as a linear orthotropic viscoelastic materialWood Science and Technology, 1972