Calculation method for the response time to step inputs for approximate dynamic models of distillation columns
Authors:
- 1 November 1972
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 18 (6) , 1243-1252
Abstract
A calculation method to determine the response time to be used for approximate mathematical models is developed for the dynamic behavior of distillation columns. Previous work has shown that the concept of Inventory time can be successfully used to approximate the response time, that is, the 60% point of the step response, of distillation columns operating at a high degree of separation. A modified version of the inventory time method, based on the minimum change of storage, has been developed to predict the response time for other ranges of separation within reasonable bounds of error, ± 10%. Only steady state and design data were used. A rigorous nonlinear simulation generates the steady state and transient data upon which the approximate models are based.While the modified inventory time method developed cannot handle every possible operating condition with the desired degree of accuracy, it has been shown to apply over a much wider range of operating conditions than the original inventory time method.Keywords
This publication has 4 references indexed in Scilit:
- Understanding and Prediction of the Dynamic Behavior of Distillation ColumnsIndustrial & Engineering Chemistry Process Design and Development, 1970
- Transient response and feed‐forward control of a distillation tower subject to a sequence of upsetsAIChE Journal, 1967
- Effect of the equilibrium relationship on the dynamic characteristics of distillation column sectionsAIChE Journal, 1965
- Dynamics of Heat Exchangers and Their ModelsJournal of Basic Engineering, 1960