Monitoring of Laser Powder Bed Fusion by Acoustic Emission: Investigation of Single Tracks and Layers
Authors:
Open Access
- 22 June 2021
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Mechanical Engineering
- Vol. 7
Abstract
Quality concerns in laser powder bed fusion (L-PBF) include porosity, residual stresses and deformations during processing. Single tracks are the fundamental building blocks in L-PBF and their shape and geometry influence subsequent porosity in 3D L-PBF parts. The morphology of single tracks depends primarily on process parameters. The purpose of this paper is to demonstrate an approach to acoustic emission (AE) online monitoring of the L-PBF process for indirect defect analysis. This is demonstrated through the monitoring of single tracks without powder, with powder and in layers. Gas-borne AE signals in the frequency range of 2–20 kHz were sampled using a microphone placed inside the build chamber of a L-PBF machine. The single track geometry and shape at different powder thickness values and laser powers were studied together with the corresponding acoustic signals. Analysis of the acoustic signals allowed for the identification of characteristic amplitudes and frequencies, with promising results that support its use as a complementary method for in-situ monitoring and real-time defect detection in L-PBF. This work proves the capability to directly detect the balling effect that strongly affects the formation of porosity in L-PBF parts by AE monitoring.Keywords
This publication has 59 references indexed in Scilit:
- Fatigue strength assessment of “as built” AlSi10Mg manufactured by SLM with different build orientationsInternational Journal of Fatigue, 2020
- Process optimization of complex geometries using feed forward control for laser powder bed fusion additive manufacturingAdditive Manufacturing, 2020
- Scientific, technological and economic issues in metal printing and their solutionsNature Materials, 2019
- Spatially resolved acoustic spectroscopy for texture imaging in powder bed fusion nickel superalloysAIP Conference Proceedings, 2019
- Beautiful and Functional: A Review of Biomimetic Design in Additive ManufacturingAdditive Manufacturing, 2019
- An overview of residual stresses in metal powder bed fusionAdditive Manufacturing, 2019
- Additive manufacturing of metallic components – Process, structure and propertiesProgress in Materials Science, 2018
- Fluid and particle dynamics in laser powder bed fusionActa Materialia, 2018
- Effect of hot isostatic pressing procedure on performance of Ti6Al4V: Surface qualities, microstructure and mechanical propertiesJournal of Alloys and Compounds, 2016
- Effect of focus position on informational properties of acoustic emission generated by laser–material interactionsApplied Surface Science, 2006