Synthesis and characterization of phenol‐urea‐formaldehyde foaming resin used to block air leakage in mining
Authors:
- 15 January 2014
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 35 (10) , 2056-2066
Abstract
In this study, phenol, urea, and paraformaldehyde were used as the monomers for the one‐step synthesis of phenol‐urea‐formaldehyde (PUF) foaming resin that was used to block air leakage in mining. An orthogonal test was used to study the effects of urea amount, catalyst amount, reaction temperature, and reaction time on the foaming property of the resin. The results showed that the optimum parameters for synthesizing PUF resin are as follows: 1 mol phenol, 0.5 mol urea, 3 mol formaldehyde equivalents of paraformaldehyde, and 0.05 mol catalyst at 75°C for 3 h. The infrared and 13C nuclear magnetic resonance spectra of the PUF resin showed that the chemical structure of the PUF resin was significantly different from that of phenol‐formaldehyde resin, indicating that a copolymerization reaction has occurred among the three components, that is, phenol, urea, and paraformaldehyde. In this study, PUF foam was prepared from catalysts and PUF resin. The results showed that the foaming capacity and oxygen index of the PUF foam were significantly improved by using urea, whereas the shrinking percentage decreased with no change in compression strength. POLYM. COMPOS., 35:2056–2066, 2014. © 2014 Society of Plastics EngineersKeywords
Funding Information
- Key technology projects for preventing major accident of National Security State Administration of Work Safety.
This publication has 26 references indexed in Scilit:
- Influence of the amount of catalyst and initial pH on the phenolic resol resin formationPolymer, 2000
- Synthesis of phenol–formaldehyde resole resins in the presence of tetraalkylammonium hydroxides as catalystsPolymer, 1999
- Kinetics of phenolic resol resin formation by HPLC. III: Zinc acetatePolymer, 1999
- Structure–properties relationship for resols with different formaldehyde/phenol molar ratioPolymer, 1999
- Kinetics of phenolic resol resin formation by HPLC. 2. Barium hydroxidePolymer, 1998
- Kinetics of phenolic resol resin formation by HPLCPolymer, 1998
- Phenolic resins: 3. Study of the reactivity of the initial monomers towards formaldehyde at constant pH, temperature and catalyst typePolymer, 1996
- Phenolic resins: 2. Influence of catalyst type on reaction mechanisms and kineticsPolymer, 1996
- Phenolic resins: 5. Solid-state physicochemical study of resoles with variable FP ratiosPolymer, 1996
- Phenolic resins: 1. Mechanisms and kinetics of phenol and of the first polycondensates towards formaldehyde in solutionPolymer, 1994