Flexural Retrofit of Support Regions of Reinforced Concrete Beams with Anchored FRP Ropes Using NSM and ETS Methods under Reversed Cyclic Loading
Authors:
- 1 February 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Composites for Construction
- Vol. 21 (1)
Abstract
Many studies have been carried out on enhancing the positive moment capacity of the midspan areas of RC beams with fiber-reinforced polymer (FRP) reinforcement under monotonic increasing loads. The present study focuses on retrofitting of beam support regions under reversed cyclic loading conditions representing seismic conditions. The tests were conducted on seven full-scale RC beam-column-slab subassemblages with a part of transverse beams perpendicular to the main beam. The specimens were divided into three series that represented different geometrical characteristics of beams and columns in frames such as wide beam–narrow column, narrow beam–wide column, and beam and column of equal widths. One reference specimen in each series was tested as is, while the remaining four specimens were tested after being retrofitted with near surface–mounted (NSM) carbon fiber–reinforced polymer (CFRP) ropes. Two different retrofitting details in terms of anchorage of CFRP ropes at the support region were applied [NSM and embedded through-section (ETS)] and their effectiveness is investigated. Furthermore, the validity of design code formulations currently available for near surface–mounting method is investigated and a modification is proposed to consider the effects of cyclic loading conditions. The results show that the retrofitted beams achieved an enhancement in the moment capacity but it could not be sustained at large deformations due to weakening of bond between concrete and adhesive under cyclic actions and localization of cracks at the maximum moment zone.Keywords
This publication has 53 references indexed in Scilit:
- Bond behavior of FRP NSM systems in concrete elementsComposites Part B: Engineering, 2012
- Bond Efficiency of EBR and NSM FRP Systems for Strengthening Concrete MembersJournal of Composites for Construction, 2011
- Experimental performances of RC beams strengthened with FRP materialsConstruction and Building Materials, 2010
- New Approach for Modeling the Contribution of NSM FRP Strips for Shear Strengthening of RC BeamsJournal of Composites for Construction, 2010
- Effects of Variation of Axial Load and Bidirectional Loading on Seismic Performance of GFRP Retrofitted Reinforced Concrete Exterior Beam-Column JointsJournal of Composites for Construction, 2010
- Fatigue Behavior of RC Beams Strengthened with NSM CFRP RodsJournal of Composites for Construction, 2009
- Near surface mounted CFRP strips for the flexural strengthening of RC columns: Experimental and numerical researchEngineering Structures, 2008
- Experimental Investigation of FRP-Strengthened RC Beam-Column JointsJournal of Composites for Construction, 2003
- Fiber-Reinforced Polymer Composites for Construction—State-of-the-Art ReviewJournal of Composites for Construction, 2002
- Behavior of Precracked RC Beams Strengthened with Carbon FRP SheetsJournal of Composites for Construction, 1997