Wettability and Contact Time on a Biomimetic Superhydrophobic Surface
Open Access
Abstract
Inspired by the array microstructure of natural superhydrophobic surfaces (lotus leaf and cicada wing), an array microstructure was successfully constructed by high speed wire electrical discharge machining (HS-WEDM) on the surfaces of a 7075 aluminum alloy without any chemical treatment. The artificial surfaces had a high apparent contact angle of 153° ± 1° with a contact angle hysteresis less than 5° and showed a good superhydrophobic property. Wettability, contact time, and the corresponding superhydrophobic mechanism of artificial superhydrophobic surface were investigated. The results indicated that the micro-scale array microstructure was an important factor for the superhydrophobic surface, while different array microstructures exhibited different effects on the wettability and contact time of the artificial superhydrophobic surface. The length (L), interval (S), and height (H) of the array microstructure are the main influential factors on the wettability and contact time. The order of importance of these factors is H > S > L for increasing the apparent contact angle and reducing the contact time. The method, using HS-WEDM to fabricate superhydrophobic surface, is simple, low-cost, and environmentally friendly and can easily control the wettability and contact time on the artificial surfaces by changing the array microstructure.Keywords
This publication has 31 references indexed in Scilit:
- Design and Fabrication of the Lyophobic Slippery Surface and Its Application in Anti-IcingThe Journal of Physical Chemistry C, 2016
- Extreme Wetting-Resistant Multiscale Nano-/Microstructured Surfaces for Viscoelastic Liquid RepellenceJournal of Nanomaterials, 2016
- Fabrication of CuO hierarchical flower-like structures with biomimetic superamphiphobic, self-cleaning and corrosion resistance propertiesChemical Engineering Journal, 2016
- Progress in understanding wetting transitions on rough surfacesAdvances in Colloid and Interface Science, 2015
- One-step method for fabrication of biomimetic superhydrophobic surface on aluminum alloyColloids and Surfaces A: Physicochemical and Engineering Aspects, 2015
- Mechanically Robust Superamphiphobic Aluminum Surface with Nanopore-Embedded MicrotextureLangmuir, 2013
- One-Step Process for Superhydrophobic Metallic Surfaces by Wire Electrical Discharge MachiningACS Applied Materials & Interfaces, 2012
- Design and Creation of Superwetting/Antiwetting SurfacesAdvanced Materials, 2006
- A Lotus‐Leaf‐like Superhydrophobic Surface: A Porous Microsphere/Nanofiber Composite Film Prepared by ElectrohydrodynamicsAngewandte Chemie International Edition, 2004
- Characterization and Distribution of Water-repellent, Self-cleaning Plant SurfacesAnnals of Botany, 1997