Test of a Fluid-Film Wave Bearing at 350°C with Liquid Lubricants

Authors:

Abstract
A novel fluid-film wave bearing has been run at a higher temperature (350°C) than ever before with a perfluoropolyether (PFPE)-K liquid lubricant. Additionally, the wave journal bearing (45 mm diameter and 24 mm long) completed an 8-h endurance test at the NASA Glenn Research Center. The lubricant was PFPE-K XHT 500. After being maintained at 350° C for 8 h, the bearing temperature was raised to 356°C for the last 30 min of the run. The speed was 29,000 rpm and the load ranged from 2670 to 3560 N. The bearing was perfectly stable both dynamically and thermally. The observed temperature was more than 150°C above that run with current turbine engine lubricants. The use of high-temperature bearings as tested here would allow efficiency increases of more than 5% in aero or terrestrial turbine engines.

This publication has 8 references indexed in Scilit: