Measurements of the bulk, C-axis electromechanical coupling constant as a function of AlN film quality

Authors:
  • JLJ.J. Lutsky
    J.J. Lutsky
  • RRR. Reif
    R. Reif
  • CSC.G. Sodini
    C.G. Sodini
  • ABA. Becker
    A. Becker
  • LFL. Fetter
    L. Fetter
  • HHH. Huggins
    H. Huggins
  • RMR. Miller
    R. Miller
  • JPJ. Pastalan
    J. Pastalan
  • GRG. Rittenhouse
    G. Rittenhouse
  • YWY.-H. Wong
    Y.-H. Wong

Abstract
Piezoelectric thin film AlN has great potential for on-chip devices such as thin-film resonator (TFR)-based bandpass filters. The AlN electromechanical coupling constant, K/sup 2/, is an important material parameter that determines the maximum possible bandwidth for bandpass filters. Using a previously published extraction technique, the bulk c-axis electromechanical coupling constant was measured as a function of the AlN X-ray diffraction rocking curve [full width at half maximum (FWHM)]. For FWHM values of less than approximately 4/spl deg/, K/sup 2/ saturates at approximately 6.5%, equivalent to the value for epitaxial AlN. For FWHM values >4/spl deg/, K/sup 2/ gradually decreases to approximately 2.5% at a FWHM of 7.5/spl deg/. These results indicate that the maximum possible bandwidth for TFR-based bandpass filters using polycrystalline AlN is approximately 80 MHz and that, for 60-MHz bandwidth PCS applications, an AlN film quality of >5.5/spl deg/ FWHM is required.

This publication has 23 references indexed in Scilit: