Binder MIMO Channels
Authors:
- Kibeom SeongKSKibeom Seong
- Youngjae KimYKYoungjae Kim
- Mehdi MohseniMMMehdi Mohseni
- Mark H. BradyMBMark H. Brady
- 20 August 2007
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Communications
- Vol. 55 (8) , 1617-1628
Abstract
This paper introduces a multiple-input multiple-output channel model for the characterization of a binder of telephone lines. This model is based on multiconductor transmission line theory, and uses parameters that can be obtained from electromagnetic theory or measured data. The model generates frequency-dependent channel/binder transfer function matrices as a function of cable type, geometric line-spacing and twist-length parameters, and source--load configurations. The model allows the extraction of the magnitude and the phase of individual near end crosstalk, far end crosstalk, split-pair, and phantom transfer functions from the transfer function matrix of the binder. These individual crosstalk transfer functions are often found to be very sensitive to small imperfections in the binder. Examples of category 3 twisted pair American telephone lines and ldquoquadrdquo telephone cables are also presented.Keywords
This publication has 14 references indexed in Scilit:
- Characterisation of crosstalk in terms of mean value and standard deviationIEE Proceedings - Science, Measurement and Technology, 2003
- Analysis of the helical twisted-wire pair running above ground:transfer function evaluationIEEE Transactions on Electromagnetic Compatibility, 2003
- Vectored transmission for digital subscriber line systemsIEEE Journal on Selected Areas in Communications, 2002
- NEXT and FEXT models for twisted-pair North American loop plantIEEE Journal on Selected Areas in Communications, 2002
- Sensitivity of Crosstalk in Twisted-Pair Circuits to Line TwistIEEE Transactions on Electromagnetic Compatibility, 1982
- The Covariance of Near End Crosstalk and Its Application to PCM System Engineering in Multipair CableIEEE Transactions on Communications, 1979
- The Theory of Uniform Cables-Part I: Calculation of Propagation ParametersBell System Technical Journal, 1977
- Engineering of T1 Carrier System Repeatered LinesBell System Technical Journal, 1963
- Application of matrix methods to the solution of travelling-wave phenomena in polyphase systemsProceedings of the Institution of Electrical Engineers, 1963
- Steady State Solutions of Transmission Line EquationsBell System Technical Journal, 1941