Thermal Effect on Rheological Properties of Epoxy Asphalt Mixture and Stress Prediction for Bridge Deck Paving
Authors:
- 1 October 2019
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 31 (10)
Abstract
Epoxy asphalt mixture has been widely used as an excellent paving material on long-span steel bridges; however, low-temperature cracking is a significant concern for paving on an orthotropic steel deck. Analysis of low-temperature thermal stress can be a challenge owing to the varying modulus of epoxy resin asphalt mixture at different temperatures. This paper presents an investigation into the rheological behaviors and models for epoxy resin asphalt mixture under different temperatures. Bending creep tests were conducted in a range of temperatures from 10°C to 60°C, and creep compliance curves were obtained. Based on the test results, five succinct but practical viscoelastic models were used for creep modeling, and parameters corresponding to different temperatures were obtained. Using a numerical approach, the creep compliance results were converted into master curves of relaxation modulus, and then the low-temperature thermal stress was calculated for the pavement layer. The experimental and simulation results indicated that the modified second-order extensive Kelvin model could be used to describe creep performance very well for epoxy resin asphalt mixture in a wide range of temperatures, and epoxy asphalt is highly adaptable to a cold working environment when used as the paving layer of steel bridge decks.Keywords
This publication has 23 references indexed in Scilit:
- Fractional linear viscoelastic constitutive relations of anhydride-cured thermosetting rubber-like epoxy asphalt bindersConstruction and Building Materials, 2018
- Alternate uses of epoxy asphalt on bridge decks and roadwaysConstruction and Building Materials, 2015
- Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binderConstruction and Building Materials, 2015
- Characterization of the stiffness of asphalt surfacing materials on orthotropic steel bridge decks using dynamic modulus test and flexural beam testConstruction and Building Materials, 2013
- Investigation of mechanical properties of thin epoxy polymer overlay materials upon orthotropic steel bridge decksConstruction and Building Materials, 2012
- Computational framework for common visco-elastic models in engineering based on the theory of rheologyComputers and Geotechnics, 2012
- Modelling the linear viscoelastic rheological properties of bituminous bindersConstruction and Building Materials, 2011
- Investigation of the properties of epoxy resin‐modified asphalt mixtures for application to orthotropic bridge decksJournal of Applied Polymer Science, 2011
- Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography imagesConstruction and Building Materials, 2011
- Effects of epoxy resin contents on the rheological properties of epoxy‐asphalt blendsJournal of Applied Polymer Science, 2010