A novel method for colouration of cotton using clay nano‐adsorbent treatment
Authors:
- Mazeyar Parvinzadeh GashtiMazeyar Parvinzadeh Gashti
- Rambod RashidianRRRambod Rashidian
- Arash AlmasianAAArash Almasian
- Ali Badakhshan ZohouriAZAli Badakhshan Zohouri
- 17 May 2013
- journal article
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 42 (3) , 175-185
Abstract
Purpose: In recent years, the textile industry has been required to develop new methods and technologies through introduction of some new materials in various processes rather than employing the same conventional chemicals. The aim of this research was to investigate the changes induced on the cotton fibre by the nanoclay treatment using a pre‐treatment method.Design/methodology/approach: The fibres were dyed with basic and direct dyes after the nanoclay pre‐treatment. Technical measurements were studied including Fourier‐transform infrared spectroscopy (FTIR), UV‐visible spectrophotometer, differential scanning calorimetry (DSC), thermal degradation analysis (TGA), scanning electron microscopy (SEM), moisture regain measurement (MRM), tensile strength test (TST), reflectance spectroscopy (RS) and fastnesses evaluation.Findings: The intensity of the major peaks in FTIR spectra of the nanoclay treated sample is in favour of the chemical changes of the cellulose functional groups. Basic dyes showed a higher dyeability on the clay pre‐treated samples compared to raw materials. The results of the colour measurements showed that the more concentration of the clay mineral was used, the darker the colour of the dyed sample was. Some interesting results were obtained in the research.Research limitations/implications: The nanoclay and a dispersing agent used in the present context were used as received. Besides, the type of the dispersing agent is important for preparation of a colloidal dispersion of nanoclay.Practical implications: The method developed in this research provides a simple and practical solution for improving the dyeability of cotton with direct and basic dyes.Originality/value: The method for enhancing the dyeability of cotton is novel and can be used in cotton processing with new properties.Keywords
This publication has 61 references indexed in Scilit:
- The Effect of Ionizing Gamma Radiation on Natural and Synthetic Fibers and Its Implications for the Forensic Examination of Fiber Evidence*Journal of Forensic Sciences, 2011
- Mechanism of traditional Bogolan dyeing technique with clay on cotton fabricApplied Clay Science, 2010
- Thermogravimetric analysis of developing cotton fibersThermochimica Acta, 2010
- A new approach to improve dyeability of nylon 6 fibre using a subtilisin enzymeColoration Technology, 2009
- Effect of nanoclays on the dyeability of polypropylene nanocomposite fibresColoration Technology, 2008
- Characterization of cotton fabric scouring by FT-IR ATR spectroscopyCarbohydrate Polymers, 2004
- Experimental study and modeling of basic dye sorption by diatomaceous clayApplied Clay Science, 2003
- Polymer/layered silicate nanocomposites: a review from preparation to processingProgress in Polymer Science, 2003
- Modern Approaches for Intelligent Surface ModificationJournal of Industrial Textiles, 2003
- Effect of chemical reagents on the fine structure of cellulose. Part III. Action of caustic soda on cotton and ramieJournal of Polymer Science Part A-2: Polymer Physics, 1966