Development of a crowdsourcing-based system for computing the international roughness index
Authors:
- 24 April 2020
- journal article
- research article
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 23 (2) , 489-498
Abstract
Pavement roughness is one of the essential parameters of pavement quality affecting ride quality, driving safety, and fuel consumption. The International Roughness Index has been widely deployed to evaluate pavement surface roughness. A vibration-based system is developed by using a low-cost three-axis Micro-Electro-Mechanical Systems accelerometer and a Global Positioning System sensor, which are connected to an Arduino board and embedded in a vehicle to monitor the road condition. The pavement profile is obtained by double integration of Z-axis acceleration data, and then the International Roughness Index is calculated via the Process Valves & Automation Systems Software using the obtained profile. The calculated International Roughness Index is correlated with ground truth data captured by a Road Surface Profiler with the coefficient of determination of 0.82 and an average error of 15%. The results demonstrate that the developed system can calculate the International Roughness Index with adequate accuracy at the network level. Besides, due to the low system cost and ease of use, it can be widely applied by road users to monitor pavement roughness as a crowdsourcing-based data collection system.Keywords
This publication has 36 references indexed in Scilit:
- MAARGHA: A Prototype System for Road Condition and Surface Type Estimation by Fusing Multi-Sensor DataISPRS International Journal of Geo-Information, 2015
- Inertial Sensor Sample Rate Selection for Ride Quality MeasuresJournal of Infrastructure Systems, 2015
- On-the-road Measurements to Establish the Dynamic Characteristics of Transport VehiclesPackaging Technology and Science, 2015
- Road profile measurement using the two degrees of freedom response-type mechanismProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2014
- Crowdsourcing and Its Application to Transportation Data Collection and ManagementTransportation Research Record: Journal of the Transportation Research Board, 2014
- Road Roughness and Whole Body Vibration: Evaluation Tools and Comfort LimitsJournal of Transportation Engineering, 2010
- The use of vehicle acceleration measurements to estimate road roughnessVehicle System Dynamics, 2008
- Vehicle ride evaluation based on a time-domain variable speed driving patternInternational Journal of Vehicle Design, 2008
- Moving Average Filters2003
- Relating Road Roughness and Vehicle Speeds to Human Whole Body Vibration and Exposure LimitsInternational Journal of Pavement Engineering, 2002