Maximizing the Performance of 3D Printed Fiber-Reinforced Composites
Open Access
- 18 May 2021
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 5 (5) , 136
Abstract
Fiber-reinforced 3D printing technology offers significant improvement in the mechanical properties of the resulting composites relative to 3D printed (3DP) polymer-based composites. However, 3DP fiber-reinforced composite structures suffer from low fiber content compared to the traditional composite, such as 3D orthogonal woven preforms solidified with vacuum assisted resin transfer molding (VARTM) that impedes their high-performance applications such as in aerospace, automobile, marine and building industries. The present research included fabrication of 3DP fiberglass-reinforced nylon composites, with maximum possible fiber content dictated by the current 3D printing technology at varying fiber orientations (such as 0/0, 0/90, ±45 and 0/45/90/−45) and characterizing their microstructural and performance properties, such as tensile and impact resistance (Drop-weight, Izod and Charpy). Results indicated that fiber orientation with maximum fiber content have tremendous effect on the improvement of the performance of the 3DP composites, even though they inherently contain structural defects in terms of voids resulting in premature failure of the composites. Benchmarking the results with VARTM 3D orthogonal woven (3DOW) composites revealed that 3DP composites had slightly lower tensile strength due to poor matrix infusion and voids between adjacent fiber layers/raster, and delamination due to lack of through-thickness reinforcement, but excellent impact strength (224% more strong) due to favorable effect of structural voids and having a laminated structure developed in layer-by-layer fashion.Keywords
This publication has 34 references indexed in Scilit:
- Evaluating the effect of variable fiber content on mechanical properties of additively manufactured continuous carbon fiber compositesJournal of Reinforced Plastics and Composites, 2020
- The Road to Improved Fiber-Reinforced 3D Printing TechnologyTechnologies, 2020
- 3D printing technology of polymer-fiber composites in textile and fashion industry: A potential roadmap of concept to consumerComposite Structures, 2020
- A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and propertiesComposite Structures, 2020
- Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applicationsAdditive Manufacturing, 2019
- Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technologyAdditive Manufacturing, 2018
- Elastic properties of 3D printed fibre-reinforced structuresComposite Structures, 2018
- Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturingAdditive Manufacturing, 2017
- Three-dimensional printing of continuous-fiber composites by in-nozzle impregnationScientific Reports, 2016
- Experimental characterization of voids in high fibre volume fraction composites processed by high injection pressure RTMComposites Part A: Applied Science and Manufacturing, 2016