Mechanics and Failure Mechanisms of Rigid–Flexible 3D-Printed FRP Miura-Ori Structures
Open Access
Abstract
The integration of multi-material 3D printing with origami engineering offers a promising avenue for deployable structures, but weak interfacial bonding between rigid and flexible phases remains a key limitation. This study first proposed four distinct hinge designs (enclosed, interlaced, inserted, and interlocked) for Miura-ori architectures, and subsequently investigated their mechanical behaviors with further elucidation of stress-transfer efficiency and interfacial failure modes under static tensile or compressive loading. Research outcomes identified the 5.0 mm interlaced hinge as the optimal interface design, improving stress distribution at the rigid–flexible interface and suppressing premature debonding. Notably, the dominant failure mode shifted from interfacial separation to ductile fracture within a TPU elastomer. Further research proves that increasing the embedment depth of the interlaced hinge from 1.0 mm to 5.0 mm can significantly increase fracture elongation from 100.8% to 342.4% while maintaining a stable peak tensile strength of approximately 12.5 MPa. At the structural scale, dual-material printed Miura-ori architecture exhibits better mechanical performance than single-material printed spatial counterparts (5163 N vs. 4019 N in compressive capacity, 18.7 mm vs. 8.0 mm in fracture elongation). These findings provide valuable insights into high-performance deployable structure design based on multi-material additive manufacturing.Keywords
Funding Information
- National Natural Science Foundation of China (52508294)
- Young S & T Talent Support programme of Guangdong Provincial Association for Science and Technology (SKXRC2025001)
- Guangdong Provincial Department of Science and Technology (2025A1515010936)
- Start-up Project at Shenzhen University (868-000001032148)
- Start-up Project for ‘High-end and Shortage’ Talents (Category C) in Shenzhen (827-000945)
- Guangdong-Hong Kong Technology Cooperation Funding Scheme (GHP/375/23GD & 2025A0505080020)
- LingChuang Research Project of China National Nuclear Corporation (CNNC-LCKY-2025-077)
This publication has 42 references indexed in Scilit:
- Damage evolution and fracture behavior in 3D-printed materials: effects of crack propagation and progressive layer degradationProgress in Additive Manufacturing, 2026
- Experimental Investigation of 3D Printing Parameters on Mechanical Properties of TPU-87A and TPU-95AJournal of Materials Engineering and Performance, 2025
- Bond durability of BFRP and GFRP bars in sulphoaluminate cement concrete under water immersion environmentConstruction and Building Materials, 2024
- Additive Manufacturing of Carbon Fiber-reinforced Composites: A ReviewApplied Composite Materials, 2023
- Material extrusion additive manufacturing of dual material composite thermoset silicone componentsPolymer Engineering & Science, 2023
- Thermoplastic polyurethane for three‐dimensional printing applications: A reviewPolymers for Advanced Technologies, 2023
- Hygrothermal aging effect on the water diffusion in glass fiber reinforced polymer (GFRP) composite: Experimental study and numerical simulationComposites Science and Technology, 2022
- Origami-based deployable structures made of carbon fiber reinforced polymer compositesComposites Science and Technology, 2020
- Autonomous and resilient infrastructure with cognitive and self-deployable load-bearing structural componentsAutomation in Construction, 2019
- Applications of additive manufacturing in the construction industry – A forward-looking reviewAutomation in Construction, 2018