Rate Effects on Delamination Fracture Toughness of a Toughened Graphite/Epoxy
Authors:
- 1 January 1987
- book chapter
- Published by ASTM International
- p. 260-274
Abstract
The objective of this study was to determine the effects of loading rate on interlaminar fracture toughness of T300/F-185 graphite/epoxy composite, having an elastomer-modified epoxy resin matrix. Mode I interlaminar fracture was investigated by means of uniform width and width-tapered double cantilever beam (DCB) specimens. Hinged tabs were used to insure unrestrained rotation at the free ends. Specimens were loaded at quasi-static deflection rates of up to 8.5 mm/s (20 in./min) corresponding to crack extension rates of up to 21 mm/s (49.6 in./min). Crack extension was monitored by means of strain gages mounted on the surface of the specimen. Continuous records were obtained of load, deflection, and crack extension for determination of the strain energy release rate. The latter was calculated by means of the area method and beam analysis method, and expressed as a power law of the crack extension velocity. Results indicate that the strain energy release rate decreases with crack velocity by over 20% over three decades of crack velocity.Keywords
This publication has 9 references indexed in Scilit:
- Height-Tapered Double Cantilever Beam Specimen for Study of Rate Effects on Fracture Toughness of Composites1988
- Rate Effects on Delamination Fracture Toughness of Graphite/Epoxy Composites1987
- Effects of Strain Rate on Delamination Fracture Toughness of Graphite/Epoxy1985
- Effects of Lay-Up, Temperature, and Loading Rate in Double Cantilever Beam Tests of Interlaminar Crack GrowthJournal of Composites Technology and Research, 1983
- A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite MaterialsJournal of Reinforced Plastics and Composites, 1982
- Characterizing Delamination Growth in Graphite-Epoxy1982
- FRACTURE MECHANICS OF MODE I DELAMINATION IN COMPOSITE MATERIALS1980
- The interlaminar fracture of organic-matrix, woven reinforcement compositesComposites, 1980
- Fracture Mechanics for Structural Adhesive Bonds. Part 21978