Coupled plasma-particle dynamics during low-pressure plasma spraying of 8YSZ on a complex double-airfoil geometry: Effects of gas composition and impingement angle
- 1 October 2026
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Abstract
Achieving uniform thermal-barrier coating deposition on multi-airfoil turbine components remains challenging because substrate curvature, inter-airfoil confinement, and geometric shadowing strongly affect plasma-jet behavior and particle transport. This study numerically investigates low-pressure plasma spraying of 8YSZ particles onto a double-airfoil geometry using a three-dimensional model coupling compressible turbulent plasma flow, Lagrangian particle motion and heating, and particle deposition behavior. Three representative impingement orientations, including leading-edge interaction (Angle 1 = 0°), mid-airfoil interaction (Angle 2 = 90°), and wake interaction (Angle 3 = 45°), were evaluated using two plasma gas mixtures: 30 SLPM (standard liter per minute) Ar + 60 SLPM He and 30 SLPM Ar + 60 SLPM He + 18 SLPM N2. The results demonstrate that impingement orientation has a stronger influence on predicted deposition behavior than plasma composition. Angle 1 maintained the most coherent plasma momentum and thermal structures, producing global maximum deposition rates of 6.86 and 6.96 μm s−1 for Ar + He and Ar + He + N2, respectively. Angle 2 exhibited strong jet splitting and particle bypass, resulting in maximum deposition rates of 0.37 and 0.34 μm s−1. Angle 3 generated wake recirculation and particle-path convergence, producing the highest local deposition rates of 28.75 and 31.59 μm s−1 but with significant spatial variation. Quantitative analysis of sampling locations confirmed that high local deposition rates do not necessarily indicate improved deposition uniformity. These findings highlight that controlling particle accessibility and impingement orientation is critical for optimizing deposition on complex double-airfoil geometries.Keywords
Funding Information
- National Key Research and Development Program of China (2021YFB4001400)
- Key Research and Development Projects of Shaanxi Province (S2023-YF-LLRH-QCYK-0201)
- National Natural Science Foundation of China (U2430212)
This publication has 54 references indexed in Scilit:
- A rapid steady/unsteady aerodynamic analysis method based on panel method coupled boundary layer theoryAerospace Science and Technology, 2025
- Revolutionizing plasma sprayed LSCF cathodes: Fe-induced phase restoration and enhanced electrochemical performance for high-efficiency SOFCsChemical Engineering Journal, 2025
- Treelike PS-PVD coating: Hierarchical branching by shading and sinteringActa Materialia, 2024
- Improvement strategy on thermophysical properties of A2B2O7-type rare earth zirconates for thermal barrier coatings applications: A reviewInternational Journal of Minerals, Metallurgy and Materials, 2024
- On the Heat-Transfer Effect of Spraying Speed During the Plasma Spraying on Turbine BladeJournal of Thermal Spray Technology, 2023
- Progress in ceramic materials and structure design toward advanced thermal barrier coatingsJournal of Advanced Ceramics, 2022
- Columnar Thermal Barrier Coatings Produced by Different Thermal Spray ProcessesJournal of Thermal Spray Technology, 2021
- Recent progress in thermal/environmental barrier coatings and their corrosion resistanceRare Metals, 2019
- Generation of Long Laminar Plasma Jets: Experimental and Numerical AnalysesPlasma Chemistry and Plasma Processing, 2019
- Solution Precursor Plasma Spray (SPPS) technique of catalyst coating for hydrogen production in a single channel with cavities plate type methanol based microreformerChemical Engineering Journal, 2015