Occupational and Public Field Exposure from Communication, Navigation, and Radar Systems Used for Air Traffic Control
Authors:
- Wout JosephWJWout Joseph
- Francis GoeminneFGFrancis Goeminne
- Günter VermeerenGVGünter Vermeeren
- Leen VerloockLVLeen Verloock
- Luc MartensLMLuc Martens
- 1 December 2012
- journal article
- research article
- Published by Wolters Kluwer Health in Health Physics
- Vol. 103 (6) , 750-762
Abstract
Electromagnetic exposure (occupational and general public) to 14 types of air traffic control (ATC) systems is assessed. Measurement methods are proposed for in situ exposure assessment of these ATC systems. In total, 50 sites are investigated at 1,073 locations in the frequency range of 255 kHz to 24 GHz. For all installations, typical and maximal exposure values for workers and the general public are provided. Two of the 14 types of systems, Non-Directional Beacons (NDB) (up to 881.6 V m−1) and Doppler Very High Frequency (VHF) Omni-directional Range (DVOR) (up to 92.3 V m−1), exhibited levels requiring recommended minimum distances such that the ICNIRP reference levels are not exceeded. Cumulative exposure of all present radiofrequency (RF) sources is investigated, and it is concluded that the ATC source dominates the total exposure in its neighborhood.Keywords
This publication has 13 references indexed in Scilit:
- In situ occupational and general public exposure to VHF/UHF transmission for air traffic communicationRadiation Protection Dosimetry, 2012
- Assessment of RF Exposures from Emerging Wireless Communication Technologies in Different EnvironmentsHealth Physics, 2012
- In situ exposure to non‐directional beacons for air traffic controlBioelectromagnetics, 2012
- In situ magnetic field exposure and ICNIRP-based safety distances for electronic article surveillance systemsRadiation Protection Dosimetry, 2011
- GUIDELINES FOR LIMITING EXPOSURE TO TIME-VARYING ELECTRIC AND MAGNETIC FIELDS (1 Hz TO 100 kHz)Health Physics, 2010
- Exposure of Workers to Electromagnetic Fields. A Review of Open Questions on Exposure Assessment TechniquesInternational Journal of Occupational Safety and Ergonomics, 2009
- A robust, fast, and accurate deconvolution algorithm for em-field measurements around gsm and umts base stations with a spectrum analyzerIEEE Transactions on Instrumentation and Measurement, 2002
- Occupational RF ExposuresRadiation Protection Dosimetry, 1999
- Summary of measured radiofrequency electric and magnetic fields (10 kHz to 30 GHz) in the general and work environmentBioelectromagnetics, 1997
- Radiofrequency electromagnetic fields in swedish radio stations and tall FM/TV towersBioelectromagnetics, 1981