Development of low temperature bonding using in-based solders
Authors:
- 1 May 2008
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 1294-1299
Abstract
In-based solders were chosen for the low temperature bonding at lower than 180degC. Three kinds of bonding types on Au/Cu/Ti/SiO2/Si dies, which were Sn/In and Au/In for Type 1, Au/In and Au/Sn for Type 2, and InSn alloy and InSn alloy for Type 3, were studied expecting that the whole In- solder layer is converted to the mixed intermetallic compound (IMC) phases of In-Cu and In-Au IMCs after bonding below 180degC and annealing at 100~120degC. The IMC in the joints were characterized in terms of the micro structure observations and the compositional analysis with Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX), the phase identification with X-ray Diffraction (XRD) and the re-melting temperature with Differential Scanning Calorimetry (DSC). The phase equilibriums of the joints were examined by thermodynamic calculations to understand the re-melting behavior. As a result, complete bonding consisted of only high melting temperature IMCs, Cu11ln9, Cu2In, eta-Cu6Sn5, and Auln2, was successfully made at 120degC followed by annealing at 100degC in Type 3, and at 160degC with annealing for lOhrs or at 180degC without annealing for Type 1, which was confirmed by DSC measurements and explained through thermodynamic calculations.Keywords
This publication has 11 references indexed in Scilit:
- Novel Low-Temperature CoC Interconnection Technology for Multichip LSI (MCL)2007
- Self-Assembly Process for Chip-to-Wafer Three-Dimensional Integration2007
- Three-dimensional wafer stacking via Cu-Cu bonding integrated with 65-nm strained-Si/low-k CMOS technologyIEEE Electron Device Letters, 2006
- Vertical System Integration by Using Inter-Chip Vias and Solid-Liquid Interdiffusion BondingJapanese Journal of Applied Physics, 2004
- Microstructure examination of copper wafer bondingJournal of Electronic Materials, 2001
- Interfacial reactions between liquid indium and Au-deposited substratesJournal of Electronic Materials, 2000
- Intermetallic compound layer formation between copper and hot-dipped 100In, 50In-50Sn, 100Sn, and 63Sn-37Pb coatingsJournal of Electronic Materials, 1994
- Structural characterization of the CuIn intermetallic phase produced by interfacial reactions in Cu/In bimetallic filmsThin Solid Films, 1993
- Low Temperature Transient Liquid Phase (LTTLP) Bonding for Au/Cu and Cu/Cu InterconnectionsJournal of Electronic Packaging, 1992
- Room temperature interactions in copper-metal thin film couplesJournal of the Less Common Metals, 1980