Shrinkage of high-strength calcium sulfoaluminate cement concrete with impact of pre-soaked lightweight aggregate internal curing
Authors:
- 1 November 2015
- journal article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 67 (22) , 1204-1213
Abstract
The effect of internal curing using pre-soaked lightweight aggregate in high-strength calcium sulfoaluminate cement concrete on shrinkage and internal humidity was investigated. Five mixture proportions with induced internal curing water (absorbed by lightweight aggregate) to cement (wIC/c) ratios of 0, 0·03, 0·06, 0·09 and 0·12 were used in the experiments. The experimental results show that the decrease of internal humidity is gradually reduced with an increase in wIC/c ratio. Accordingly, both autogenous and drying shrinkage of concrete also gradually decrease with an increase in wIC/c. Internal curing cannot eliminate the autogenous shrinkage completely because part of the autogenous shrinkage develops within the humidity-saturated stage for early-age concrete.Keywords
This publication has 16 references indexed in Scilit:
- Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabsConstruction and Building Materials, 2014
- Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditionsCement and Concrete Composites, 2009
- Overview and Future Trends of Shrinkage ResearchMaterials and Structures, 2006
- Industrially interesting approaches to “low-CO2” cementsCement and Concrete Research, 2004
- Studies on effects of activators on properties and mechanism of hydration of sulphoaluminate cementCement and Concrete Research, 2003
- Drying, moisture distribution, and shrinkage of cement-based materialsMaterials and Structures, 2002
- High-performance cement matrices based on calcium sulfoaluminate–belite compositionsCement and Concrete Research, 2001
- Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregatesCement and Concrete Research, 2001
- Influence of key parameters on drying shrinkage of cementitious materialsCement and Concrete Research, 1999
- Characterization and identification of equilibrium and transfer moisture properties for ordinary and high-performance cementitious materialsCement and Concrete Research, 1999