Analysis of End-Windings Influence on the Transient Voltage Distribution in Machine Stator Windings by a Three Phase Model
- 1 September 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 36 (3) , 2110-2119
Abstract
Transient voltage distribution due to steep-fronted surges must be taken into account during the machines design as it can lead to main and turn insulation failure. In medium voltage machines, the end-windings region has a considerable percentage of the coil length and plays an important role during transient studies. This paper has the purpose of verifying the influence of end-windings on the transient voltage distribution by using a three-phase simulation model in which transient magnetic fields and electric circuit elements are coupled. The transient simulation and the calculation of the electrical parameters used in the model are done employing the Finite Elements Method (FEM). To verify the influence on the results, simulations for different surge rise times are performed, considering and neglecting the end-windings model. As main results, the intercoil and interturn voltages are analyzed for all turns from the three phases of one winding group. The model is validated by measurement results. It is shown that the end-windings, indeed, affect the transient voltage distribution for both, interturn and intercoil voltages, regarding the rate of rising (slope), instant, and the amplitude of the peak voltages. Moreover, all three phases are affected by the end-windings, especially for the turn-to-turn voltages.Keywords
Funding Information
- Instituto Nacional de Energia Eltrica
- Fundao de Amparo Pesquisa do Estado de Minas Gerais
- Conselho Nacional de Desenvolvimento Cientfico e Tecnolgico
- Coordenao de Aperfeioamento de Pessoal de Nvel Superior
This publication has 32 references indexed in Scilit:
- Analysis of the Voltage Distribution in a Motor Stator Winding Subjected to Steep-Fronted Surge Voltages by Means of a Multiconductor Lossy Transmission Line ModelIEEE Transactions on Energy Conversion, 2004
- High-frequency modeling for cable and induction motor overvoltage studies in long cable drivesIEEE Transactions on Industry Applications, 2002
- Transient overvoltages in electrical motors during sequential pole closureIEEE Transactions on Energy Conversion, 1999
- Estimation of voltage distribution on the inverter fed random wound induction motor windings supplied through feeder cableIEEE Transactions on Energy Conversion, 1999
- Calculation of interturn voltages in machine windings during switching transients measured on terminalsIEEE Transactions on Energy Conversion, 1995
- The effect of coil parameters on the distribution of steep-fronted surges in machine windingsIEEE Transactions on Energy Conversion, 1992
- A computer model for calculating steep-fronted surge distribution in machine windingsIEEE Transactions on Energy Conversion, 1989
- Measurement and analysis of surge distribution in motor stator windingsIEEE Transactions on Energy Conversion, 1989
- Multiconductor transmission-line model for the line-end coil of large AC machinesIEE Proceedings B Electric Power Applications, 1985
- The influence of coil and surge parameters on transient interturn voltage distribution in stator windingsIEE Proceedings B Electric Power Applications, 1983