Stress Corrosion Cracking of Stainless Steels and Nickel Alloys in High-Temperature Water
Authors:
- 1 January 2008
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 64 (1) , 15-29
Abstract
Stress corrosion cracking (SCC) studies in stainless steels and nickel alloys reveal that all grades and conditions are susceptible to SCC in high-temperature water, whether deaerated or aerated, high H2 or low, theoretical purity water or buffered/ contaminated, lower temperature or higher. However, the kinetics of SCC growth vary enormously with stress intensity, yield strength, sensitization, water chemistry, irradiation, temperature, etc. The role of yield strength is especially important because it changes with surface cold work, bulk cold work, weld shrinkage strain, and irradiation hardening; the role of metallurgical strengthening mechanisms, e.g., nitrogen additions or precipitation hardening, may have a similar effect. SCC growth rate measurements were performed in high-temperature water on unsensitized stainless steels (and Alloy 600 [UNS N06600]) of various grades and compositions. Little effect of grade/heat of stainless steel, martensite content, or H2 fugacity/permeation rate was observed, while large effects were observed for yield strength (cold work), stress intensity factor, corrosion potential, and temperature. A model “stainless steel” containing 5% Si (and elevated Ni and reduced Cr) showed high growth rates and little effect of corrosion potential or stress intensity factor.Keywords
This publication has 20 references indexed in Scilit:
- Development of fast algorithms for estimating stress corrosion crack growth rateCorrosion Science, 1999
- Stress Corrosion Cracking of Sensitized Type 304 Stainless Steel in 288C Water: A Five Laboratory Round Robin1999
- Qualification and Application of Instrumented Specimens for In‐Core Studies on Cracking Behaviour of Austenitic Stainless Steels1999
- SCC Testing and Data Quality Considerations1999
- Intergranular Stress Corrosion Cracking of Unsensitized Stainless Steels in BWR Environments1999
- Response to “ On the modeling of stress corrosion cracking of iron and nickel base alloys in high temperature aqueous environments”Corrosion Science, 1996
- Environmentally Assisted Cracking of Types 304L/316L/316NG Stainless Steel in 288°C WaterCorrosion, 1989
- Life prediction by mechanistic modeling and system monitoring of environmental cracking of iron and nickel alloys in aqueous systemsMaterials Science and Engineering: A, 1988
- Environmentally Assisted Growth Rate Response of Nonsensitized AISI 316 Grade Stainless Steels in High Temperature WaterCorrosion, 1988
- A New Membrane‐Type pH Sensor for Use in High Temperature‐High Pressure WaterJournal of the Electrochemical Society, 1980