Comparison of stimulation techniques in a geothermal injection well in a sedimentary aquifer in Szentes, Hungary
Open Access
- 30 April 2025
- journal article
- research article
- Published by Springer Nature in Geothermal Energy
- Vol. 13 (1) , 1-37
Abstract
The Upper Pannonian (UP) sandstone formation in Hungary has been utilized for thermal water production without reinjection since the 1960s. However, there is an increasing need for setting up geothermal doublets or triplets, where used water is expected to be reinjected into the same formation. Sustainable injection into porous sandstone rock formation is not straightforward. Thus, the Hungarian research and development project “Development of a well completion technology for sustainable and cost-effective reinjection of thermal water” aims at designing a methodology for sustaining the injectivity of geothermal wells in UP sandstone reservoirs. In this case study, we present an intervention approach of an old geothermal production well for reinjection at the Szentes Geothermal Field. Based on the evaluation of well conditions, the injectivity decline may be associated with reservoir characteristics, i.e., low transmissibility, mineral precipitation or local particle migration. Thus, a stimulation program was designed, where various techniques such as hydraulic fracturing, acid treatment and skin frac experiment were conducted. The novelty of this study is that to the best of our knowledge, the skin frac technique has been applied for the first time in a geothermal injection well worldwide. Based on the comparison of the various stimulation experiments, the injectivity reduction is related to phenomena in the near-wellbore area, i.e., mechanical clogging due to fines migration in the reservoir. The largest injectivity enhancement was observed due to skin frac experiment and pump lift, which was not part of the original stimulation program. The skin frac method has the potential for providing injectivity enhancement of recompleted wells in poorly cemented sandstone formations, but further field demonstration with optimized design is required. The results of this well treatment, such as regular conduction of pump lift and recommendations for proper design of skin frac treatment can be used in designing long-term reinjection tests in loose sandstone formations in geothermal reservoirs. Furthermore, future study should focus on the investigation of the link between pressure depletion due to overexploitation, subsequent compaction and land subsidence as well as injectivity problems.Keywords
Funding Information
- NKFIH (GINOP-2.2.1-15-2017-00102)
- European Regional Development Fund for the Interreg Central Europe (CE0100071)
- Helmholtz Association (VH-NG-1516)
- GFZ Helmholtz-Zentrum für Geoforschung
This publication has 36 references indexed in Scilit:
- In-situ experiments of dynamic microscopic reaction for CO2-brine-carbonate systemChemical Engineering Journal, 2025
- Impacts of interactions with low-mineralized water on permeability and pore behavior of carbonate reservoirsEnergy Geoscience, 2024
- Injection related issues of a doublet system in a sandstone aquifer - A generalized concept to understand and avoid problem sources in geothermal systemsGeothermics, 2021
- Observations and analyses of the first two hydraulic stimulations in the Pohang geothermal development site, South KoreaGeothermics, 2020
- Fines migration in geothermal reservoirs: Laboratory and mathematical modellingGeothermics, 2019
- Effect of Foliation and Fluid Viscosity on Hydraulic Fracturing Tests in Mica Schists Investigated Using Distinct Element Modeling and Field DataRock Mechanics and Rock Engineering, 2018
- Evolution of the Pannonian basin and its geothermal resourcesGeothermics, 2015
- The effect of hot water injection on sandstone permeabilityGeothermics, 2014
- Utilization of geothermal systems in South-East HungaryGeothermics, 2010
- Hydraulic stimulation of a deep sandstone reservoir to develop an Enhanced Geothermal System: Laboratory and field experimentsGeothermics, 2010