Improved Electrical Conductivity of Polyamide 12/Graphene Nanocomposites with Maleated Polyethylene-Octene Rubber Prepared by Melt Compounding
- 21 August 2012
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 4 (9) , 4740-4745
Abstract
Electrically conductive polyamide 12 (PA12)/graphene binary nanocomposites with a low percolation threshold of 0.3 vol % were prepared by melt compounding. A rapid increase in electrical conductivity from 2.8 × 10–14 S/m of PA12 to 6.7 × 10–2 S/m was achieved with ∼1.38 vol % graphene. It is shown that graphene sheets were homogeneously dispersed in PA12 matrix. Furthermore, polyethylene-octene rubber grafted with maleic anhydride (POE-g-MA) was used to further enhance the electrical conductivity of PA12/graphene nanocomposites. Three compounding sequences were adopted to tailor the microstructure and properties of the ternary nanocomposites. Both highest electrical conductivity and storage modulus were obtained when most graphene sheets were located in PA12 matrix rather than in POE-g-MA phase.Keywords
This publication has 43 references indexed in Scilit:
- Simultaneous enhancement of electrical conductivity and impact strength via formation of carbon black‐filler network in PP/EPDM BlendsPolymers for Advanced Technologies, 2011
- Electrical and thermal properties of polyamide 12 composites with hybrid fillers systems of multiwalled carbon nanotubes and carbon blackComposites Science and Technology, 2011
- Deformation-Induced Phase Transitions of Polyamide 12 at Different Temperatures: An in Situ Wide-Angle X-ray Scattering StudyMacromolecules, 2010
- Single Sheet Functionalized Graphene by Oxidation and Thermal Expansion of GraphiteChemistry of Materials, 2007
- Single‐walled carbon nanotubes/polycarbonate composites: basic electrical and mechanical propertiesPhysica Status Solidi (b), 2006
- Flame retardant mechanism of polymer/clay nanocomposites based on polypropylenePolymer, 2005
- Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrenePolymer, 2004
- Dielectric spectroscopy on melt processed polycarbonate—multiwalled carbon nanotube compositesPolymer, 2003
- Volume‐exclusion effects in polyethylene blends filled with carbon black, graphite, or carbon fiberJournal of Polymer Science Part B: Polymer Physics, 2002
- Blends of nylon 6 with an ethylene‐based multifunctional polymer. I. Rheology–structure relationshipsJournal of Applied Polymer Science, 1985