Suction Flow Measurements in a Twin-Screw Compressor
Open Access
Abstract
Mean flow velocities and the corresponding turbulence fluctuation velocities were measured within the suction port of a standard twin-screw compressor using LDV and PIV optical techniques. Time-resolved velocity measurements were carried out over a time window of 1° at a rotor speed of 1000 rpm, a pressure ratio of 1, and an air temperature of 55 °C. Detailed LDV measurements revealed a very stable and slow inflow, with almost no influence from rotor movements except near the rotors, where a more complex flow formed in the suction port. The axial velocity near the rotors exhibited wavy profiles, while the horizontal velocity showed a rotational flow motion around the centre of the port. The turbulence results showed uniform distributions and were independent of the rotors’ motion, even near the rotors. PIV measurements confirmed that there is no rotor movement influence on the inflow structure and revealed complex flow structures, with a crossflow dominated by a main flow stream and two counter-rotating vortices in the X-Y plane; in the Y-Z plane, the presence of a strong horizonal stream was observed away from the suction port, which turned downward vertically near the entrance of the port. The corresponding turbulence results in both planes showed uniform distributions independent of rotor motions that were similar in all directions.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/C541457/1)
This publication has 16 references indexed in Scilit:
- Development of CFD model for Radial Leakage Flow in a Roots Blower and Validation using Particle Image VelocimetryResults in Engineering, 2025
- Error-based dynamic velocity range of PIV processing algorithmsExperiments in Fluids, 2025
- Research Progress on the Manufacturing of Screw-Shaped Parts in Screw CompressorsApplied Sciences, 2024
- CFD Analysis of Leakage Flow in Radial Tip Gap of Roots Blower2024
- Turbulent flow development within the discharge cavity of a screw compressorInternational Journal of Engine Research, 2023
- Turbulent Flow Measurements near the Discharge Port of a Screw CompressorFlow, Turbulence and Combustion, 2019
- A critical review of the experimental studies related to twin screw compressorsProceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2019
- Axial Flow Characteristics Within a Screw CompressorHVAC&R Research, 2008
- Review Article: Screw Compressors in Refrigeration and Air ConditioningHVAC&R Research, 2004
- On gearing of helical screw compressor rotorsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 1998