Impact of electrospinning process parameters on the measured current and fiber diameter
- 17 July 2015
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 55 (11) , 2576-2582
Abstract
In this article, polycaprolactone (PCL) nanofibres were processed by electrospinning using a 3:1 ratio of tetrahydrofuran to methanol as solvent. The solvent choice was motivated by the possibility of greener alternatives to the halogenated compounds most often used for electrospinning. The morphologies and fiber diameters resulting from the electrospinning of PCL solutions at room temperature under various conditions are presented in this article. The material morphology was characterized using scanning electron microscopy and a measuring software. The process was optimized for smaller fibers with a narrower fiber diameter distribution by studying parameters such as polymer concentration, applied voltage, the tip to collector distance (TCD), and the solution flow rate. A comparison analysis was used to separate the current resulting from whipping and that resulting from spraying at high voltage. The fiber diameters obtained under various processing conditions were effectively modeled using the terminal jet theory, referenced in several works. Process parameters were optimal for a 20% PCL concentration spun at a flow rate of 0.5 mL/h, with a TCD of 15 cm and an applied voltage of 8 kV. Fibers spun under these conditions displayed diameters of 546 ± 173 nm. POLYM. ENG. SCI., 55:2576–2582, 2015. © 2015 Society of Plastics EngineersKeywords
Funding Information
- AUTO21 of the Ontario Centre of Excellence, Academic Research Program of the Royal Military College of Canada
This publication has 28 references indexed in Scilit:
- Electrospinning of polymer nanofibers: Effects on oriented morphology, structures and tensile propertiesComposites Science and Technology, 2010
- A Review: Electrospinning of Biopolymer Nanofibers and their ApplicationsPolymer Reviews, 2008
- A review on electrospinning design and nanofibre assembliesNanotechnology, 2006
- Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A ReviewTissue Engineering, 2006
- Electrospinning of nanofibersJournal of Applied Polymer Science, 2005
- A review on polymer nanofibers by electrospinning and their applications in nanocompositesComposites Science and Technology, 2003
- Electrospinning process and applications of electrospun fibersJournal of Electrostatics, 1995
- Electrically driven jetsProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1969
- Instability of Electrified Liquid SurfacesPhysical Review B, 1917
- XX. On the equilibrium of liquid conducting masses charged with electricityJournal of Computers in Education, 1882