Sandwich-structured BOPET films with high energy density and low loss for high temperature film capacitors
Open Access
- 1 October 2023
- journal article
- research article
- Published by AIP Publishing in APL Materials
- Vol. 11 (10)
Abstract
Film capacitors have widely been used in modern electrical/electronic equipment because of their high insulation property and high-power density. However, the traditional dielectric films suffered a high conduction loss under high temperature and electric field conditions, which leads to the depression of high temperature energy storage properties. Herein, sandwich-structured composite films using biaxially oriented polyethylene terephthalate (BOPET) as the outer layers were prepared to construct the interfacial barrier, which was beneficial for hindering the propagation of breakdown path. In addition, epoxy resin was applied as the adhesive inner layer to bind the outer layers up tightly, while the boron nitride nanosheets (BNNSs) in the inner layer further improved the breakdown strength of the film and inhibited the conduction loss, especially under high temperature and electric field conditions. The composite film with optimized BNNSs content had a high discharged energy density of 9.11 J/cm3 and a ultrahigh charge–discharge efficiency of 95% at 25 °C, while the values were 6.45 J/cm3 and 70% at 150 °C, respectively, of which both were much higher than those of pure BOPET. Thus, the sandwich-structure method points out a promising way of preparing dielectric films with excellent energy storage performances.Keywords
Funding Information
- National Natural Science Foundation of China (92266105)
- Scientific and Technological Innovation Foundation of Foshan (BK22BE009)
- Fundamental Research Funds for the Central Universities (06500176)
This publication has 46 references indexed in Scilit:
- Ultrahigh Discharge Efficiency and High Energy Density in Sandwich Structure K0.5Na0.5NbO3 Nanofibers/Poly(vinylidene fluoride) CompositesAdvanced Materials Interfaces, 2020
- A novel lead-free and high-performance barium strontium titanate-based thin film capacitor with ultrahigh energy storage density and giant power densityJournal of Materials Chemistry C, 2019
- Sandwich structure-assisted significantly improved discharge energy density in linear polymer nanocomposites with high thermal stabilityColloids and Surfaces A: Physicochemical and Engineering Aspects, 2019
- High Energy Density Polymer Dielectrics Interlayered by Assembled Boron Nitride NanosheetsAdvanced Energy Materials, 2019
- Designing of surface modification and sandwich structure: effective routs to improve energy storage property in polyimide-based composite filmsJournal of Materials Science: Materials in Electronics, 2019
- Multiple Interfacial Modifications in Poly(vinylidene fluoride)/Barium Titanate Nanocomposites via Double-Shell Architecture for Significantly Enhanced Energy Storage DensityACS Applied Energy Materials, 2019
- High-performance insulation materials from poly(ether imide)/boron nitride nanosheets with enhanced DC breakdown strength and thermal stabilityIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- Core@double-shells nanowires strategy for simultaneously improving dielectric constants and suppressing losses of poly(vinylidene fluoride) nanocompositesCarbon, 2018
- Effects of Interphase Modification and Biaxial Orientation on Dielectric Properties of Poly(ethylene terephthalate)/Poly(vinylidene fluoride-co-hexafluoropropylene) Multilayer FilmsACS Applied Materials & Interfaces, 2016
- Preparation and properties of thermostable well-functionalized graphene oxide/polyimide composite films with high dielectric constant, low dielectric loss and high strength via in situ polymerizationJournal of Materials Chemistry A, 2015