Experimental Investigation on the Application of Polymer Agents in Offshore Sandstone Reservoirs: Optimization Design for Enhanced Oil Recovery
Open Access
Abstract
The conventional polymer gel has high initial viscosity and short gelation time, making it difficult to meet the requirements of deep profile control in offshore reservoirs with large well spacing and strong heterogeneity. This paper evaluates the performance and core plugging capacity of novel functional polymer gels and microspheres to determine the applicability of core permeability ranges. On the heterogeneous core designed based on the reservoir characteristics of Block B oilfield, optimization was conducted separately for the formulation, dosage, and slug combinations of the polymer gel/microsphere. Finally, oil displacement experiments using polymer and microsphere combinations were conducted on vertically and planar heterogeneous cores to simulate reservoir development effects. The experimental results show the novel functional polymer gel exhibits slow gelation with high gel strength, with viscosity rapidly increasing four days after aging, ultimately reaching a gel strength of 74,500 mPa·s. The novel functional polymer gel and polymer microsphere can effectively plug cores with permeabilities below 6000 mD and 2000 mD, respectively. For heterogeneous cores with an average permeability of 1000 mD, the optimal polymer microsphere has a concentration of 4000 mg/L and a slug size of 0.3 PV; for heterogeneous cores with an average permeability of 4000 mD, the optimal functional polymer gel has a concentration of 7500 mg/L and a slug size of 0.1 PV. In simulations of vertically and planarly heterogeneous reservoirs, the application of polymer agent increases the oil recovery factor by 53% and 38.7% compared to water flooding. This realizes the gradual and full utilization of layers with high, medium, and low permeability.Keywords
Funding Information
- China National Offshore Oil Corporation (KJGG2021-0502)
This publication has 19 references indexed in Scilit:
- Comprehensive review of enhanced oil recovery strategies for heavy oil and bitumen reservoirs in various countries: Global perspectives, challenges, and solutionsHeliyon, 2024
- Chemical enhanced oil recovery: Synergetic mechanism of alkali, surfactant and polymer with overview of methyl ester sulfonate as a green alternative for EOR surfactantFuel, 2024
- Experimental studies on effectiveness of graphene oxide nanosheets dispersion in water/aqueous PHPA for enhanced oil recoveryJournal of Molecular Liquids, 2023
- Optimizing productivity in oil rims: simulation studies on water and gas injection patternsArabian Journal of Geosciences, 2021
- Synthesis and characterization of highly hydrophilic self-associating terpolymers: Rheological, thermal, and corrosion protection studiesChemical Engineering Journal, 2021
- Effect of water and gas injection schemes on synthetic oil rim modelsJournal of Petroleum Exploration and Production Technology, 2020
- Heterogeneity control ability in porous media: Associative polymer versus HPAMJournal of Petroleum Science and Engineering, 2019
- Effect of profile-control oil-displacement agent on increasing oil recovery and its mechanismFuel, 2019
- A comprehensive review of polyacrylamide polymer gels for conformance controlPetroleum Exploration and Development, 2015
- Polymers as relative permeability modifiers: adsorption and the dynamic formation of thick polyacrylamide layersJournal of Petroleum Science and Engineering, 2004