Analysis of the in‐plane response of earthen masonry infill panels partitioned by sliding joints
- 2 February 2016
- journal article
- research article
- Published by Wiley in Earthquake Engineering & Structural Dynamics
- Vol. 45 (8) , 1209-1232
Abstract
Summary: The vulnerability of infilled frames represents a critical issue in many regions with high seismicity around the world where infills are typically made of heavy masonry as they are used for thermal control of the buildings because of their thermal inertia. In this context, the use of earthen masonry infills can give a superior performance because of their ability to regulate thermal‐hygrometric performance of the building and sustainability of its life‐cycle.This paper presents a numerical study on the seismic behaviour of infill walls made of earthen masonry and partitioned with horizontal wooden planks that allow the relative sliding of the partitions. The combination of the deformability of earthen masonry and the sliding mechanism occurring along the wooden planks gives a high ductility capacity to the in‐plane response of the infill and, at the same time, significantly reduces its stiffness and strength, as compared with traditional solid infills made of fired clay units. As a result, the detrimental interaction with the frame and the damage in the infill when subjected to in‐plane loading can be minimized.The numerical model is validated with results from an experimental study and is used to perform a parametric analysis to examine the influence of variations in the geometry and mechanical properties of the infill walls, as well as the configuration of the sliding joints. Based on the findings of this study, design guidelines for practical applications are provided, together with simple formulation for evaluating their performance. Copyright © 2016 John Wiley & Sons, Ltd.Keywords
This publication has 19 references indexed in Scilit:
- Mechanical properties of adobe bricks in ancient constructionsConstruction and Building Materials, 2012
- Damage Control for Clay Masonry Infills in the Design of RC Frame StructuresJournal of Earthquake Engineering, 2012
- Infill Walls with Sliding Joints to Limit Infill-Frame Seismic Interaction: Large-Scale Experimental TestJournal of Earthquake Engineering, 2011
- An engineered infilled frame: Behavior and calibrationJournal of Constructional Steel Research, 2010
- Learning from the past to protect the future: Armature CrosswallsEngineering Structures, 2008
- A plane stress softening plasticity model for orthotropic materialsInternational Journal for Numerical Methods in Engineering, 1997
- Multisurface Interface Model for Analysis of Masonry StructuresJournal of Engineering Mechanics, 1997
- Finite Element Modeling of Masonry-Infilled RC FramesJournal of Structural Engineering, 1997
- Interface Model Applied to Fracture of Masonry StructuresJournal of Structural Engineering, 1994
- An appraisal of smeared crack models for masonry shear wall analysisComputers & Structures, 1991