Study on mechanical properties of (1 % PVA fiber +1 % Steel fiber) PS‐ECC under the coupling effects of elevated temperature and dynamic loads
Authors:
- 6 January 2023
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 24 (3) , 4126-4144
Abstract
The coupling effect of temperature and impact loads can cause the concrete strength to decay and lead to the failure of the structure that cannot reach the designed load‐bearing strength. In this study, the evolution laws of dynamic compressive strength, dynamic increase factor (DIF), and absorbed energy of (1% polyvinyl alcohol [PVA] fiber +1% steel fiber) PS‐ECC (engineered cementitious composite) were obtained by a split Hopkinson compression bar test. The conclusions can be concluded: the dynamic compressive strength, DIF, and absorbed energy of PS‐ECC largely show a tendency to decrease with increasing temperature; however, the recovery effect occurs at 200°C due to the accumulation of steam inside the specimen to counteract the impact force. Then, 200°C becomes a threshold value, and the sensitivity of PS‐ECC to strain rate shows a steep drop when the temperature exceeds 200°C. Compared to 200°C, the growth rate of dynamic compressive strength, DIF, and energy absorption capacity from strain rate 50–80 s−1 decreases by 50.65, 55.24, and 45.71% at 300°C, the growth rate decreases by 55.87, 56.5, and 48.45% at 400°C. The impact energy absorption of PS‐ECC was provided mainly by PVA fiber. The energy absorption of PS‐ECC is almost the same at 300 and 400°C for the same strain rate due to PVA fiber burning disappears.Keywords
Funding Information
- National Natural Science Foundation of China (51678152, 12272247, 52204104)
This publication has 44 references indexed in Scilit:
- Coupled strain rate and temperature effects on the tensile behavior of strain-hardening cement-based composites (SHCC) with PVA fibersCement and Concrete Research, 2012
- Suggested methods for determining the dynamic strength parameters and mode-I fracture toughness of rock materialsInternational Journal of Rock Mechanics and Mining Sciences, 2012
- Effect of Fly Ash and PVA Fiber on Microstructural Damage and Residual Properties of Engineered Cementitious Composites Exposed to High TemperaturesJournal of Materials in Civil Engineering, 2011
- The effect of high temperatures on the mechanical properties of concrete made with different types of aggregatesFire Safety Journal, 2011
- Performance of Hybrid-Fiber ECC Blast/Shelter Panels Subjected to Drop Weight ImpactJournal of Materials in Civil Engineering, 2007
- Flexural responses of hybrid steel–polyethylene fiber reinforced cement composites containing high volume fly ashConstruction and Building Materials, 2007
- Simplified Inverse Method for Determining the Tensile Strain Capacity of Strain Hardening Cementitious CompositesJournal of Advanced Concrete Technology, 2007
- Behavior of Hybrid-Fiber Engineered Cementitious Composites Subjected to Dynamic Tensile Loading and Projectile ImpactJournal of Materials in Civil Engineering, 2005
- Stress–strain curves for steel-fiber reinforced concrete under compressionCement and Concrete Composites, 1999
- Strain-Rate-Dependent Constitutive Equations for ConcreteJournal of Pressure Vessel Technology, 1998