Efficient light-duty engine using turbulent jet ignition of lean methane mixtures
Authors:
- 26 November 2019
- journal article
- research article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 22 (4) , 1301-1311
Abstract
Diesel engines use diffusion-controlled combustion of a high-reactivity fuel and offer high efficiencies because they combine lean combustion with a high compression ratio. For low-reactivity fuels such as gasoline or natural gas, premixed combustion is used, which leads to lower efficiency levels as usually stoichiometric combustion is combined with lower compression ratios. Trying to apply diesel-like process parameters to low-reactivity fuels inevitably leads to problems with classical spark ignition systems as they are not able to establish robust flame propagation for such hard-to-ignite conditions. One possibility to enable fast combustion for diluted mixtures at high pressure levels is to establish ignition in a prechamber and ignite the charge of the main combustion chamber using the turbulent jets exiting the prechamber. In this study, the experimental results of a prechamber-equipped four-cylinder natural gas engine with 2 L displacement are discussed in detail. In the majority of the engine map, auxiliary fueling is used in the prechamber and a global air–fuel equivalence ratio λ is set to 1.7. At full load, a λ of 1.5 is applied without auxiliary prechamber fueling. The experiments show that such a setup is able to achieve brake efficiency levels of above 45% while maintaining peak brake mean effective pressure levels above 20 bar. At high load conditions, cylinder pressure levels at ignition timing achieve more than 80 bar and cylinder peak pressures of around 180 bars occur. The technology proved to enable robust and very fast combustion at comparably low NOx levels. A remaining challenge for the on-road use of such a technology is the reduction of the methane emissions at lean conditions.Keywords
Funding Information
- Swiss State Secretariat for Education, Research and Innovation (15.0145-1)
- European Commission (Horizon2020 grant number 652816)
This publication has 54 references indexed in Scilit:
- Abnormal combustion phenomena with different fuels in a spark ignition engine with direct fuel injectionCombustion and Flame, 2017
- Rapid compression machine study of a premixed, variable inlet density and flow rate, confined turbulent jetCombustion and Flame, 2016
- Diesel-Minimal Combustion Control of a Natural Gas-Diesel EngineEnergies, 2016
- The formation and physical properties of the particle emissions from a natural gas engineFuel, 2015
- Lean combustion by a pre-chamber charge stratification in a stationary spark ignited engineJournal of Mechanical Science and Technology, 2015
- A study on the influence of burning rate on engine knock from empirical data and simulationCombustion and Flame, 2015
- Investigation of a Methane Scavenged Prechamber for Increased Efficiency of a Lean-Burn Natural Gas Engine for Automotive ApplicationsSAE International Journal of Engines, 2015
- Das Brennverfahren des Gasmotors 20V35/44G von MANMTZ - Motortechnische Zeitschrift, 2013
- The origin of pressure oscillations in divided chamber enginesCombustion and Flame, 1982
- Fundamental studies on the volkswagen stratified charge combustion processCombustion and Flame, 1975