Desulfurization Ability of Blast Furnace Slag Containing High Al2O3 at 1773 K
Open Access
Abstract
With the consumption of high-quality iron ore resources, the grade of iron ore raw used in the iron making process has gradually decreased. The high aluminum raw materials has led to an increase in the Al2O3 content in the blast furnace slag, which has affected the normal operation of the blast furnace. The activity of the components involved in the desulfurization reaction is an important factor affecting the desulfurization process. In this paper, the effects of B(w(CaO)/w(SiO2)) and w(MgO)/w(Al2O3) on the desulfurization ability of a CaO-SiO2-MgO-Al2O3 quaternary blast furnace slag system were studied by using a double-layer graphite crucible to simulate the process of molten iron dropping through the slag at 1773 K. The desulfurization reaction mechanism of high alumina blast furnace slag is explained from the aspects of slag structure and component activity, which provides a theoretical basis for the reasonable selection of a slag making system under the condition of a high alumina content. The effects of different B and w(MgO)/w(Al2O3) on the slag structure 2343 analyzed by Fourier transform infrared spectroscopy (FT-IR). The results show that when w(MgO)/w(Al2O3) = 0.50 and w(Al2O3) = 20%, the desulfurization ability and MgO activity of slag increased with the increase of B; when w(Al2O3) = 20% and B = 1.30, the desulfurization ability and MgO activity of the slag increased with the increase of w(MgO)/w(Al2O3). The FT-IR analysis showed that with the increase of B or w(MgO)/w(Al2O3), the dissociated free oxygen ions (O2−) in the slag increased, and the dissociated free oxygen ions (O2−) interacted with the bridging oxygen (O0) of silicate, which made the complex Si-O structure in the slag gradually depolymerize and increase the desulfurization ability.Keywords
Funding Information
- National Natural Science Foundation of China (NSFC51774071, NSFC52074072, NSFC51974073, NSFC52074074, NSFC52074086)
This publication has 21 references indexed in Scilit:
- Desulphurisation ability of blast furnace slag containing high Al2O3and 5 mass% TiO2at 1773 KIronmaking & Steelmaking: Processes, Products and Applications, 2016
- Sulphide Capacity of CaO–SiO2–Al2O3–MgO System Relevant to Low MgO Blast Furnace SlagsISIJ International, 2016
- Raman Structure Investigations of CaO-MgO-Al2O3-SiO2-CrO x and Its Correlation with Sulfide CapacityMetallurgical and Materials Transactions B, 2015
- Sulphide Capacity and Mineralogy of BaO and B2O3 Modified CaO–Al2O3 Top SlagISIJ International, 2014
- A Thermodynamic Model for Calculating Sulphur Distribution Ratio between CaO–SiO2–MgO–Al2O3 Ironmaking Slags and Carbon Saturated Hot Metal Based on the Ion and Molecule Coexistence TheoryISIJ International, 2009
- Sulphur partition between hot metal and high alumina blast furnace slagIronmaking & Steelmaking: Processes, Products and Applications, 2006
- Study on sulphide capacity of CaO-SiO2-Al2O3-MgO-FetO slagsJournal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, 2006
- Desulfurization Ability of Metallurgical Dusts from Blast Furnace Ironmaking Process.JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2001
- Sulphide Capacities of CaO-Al2O3-MgO and CaO-Al2O3-SiO2 Slags.ISIJ International, 1993
- Sulphur Distribution between Liquid Iron and CaO-MgO-Al2O3-SiO2 Slags Saturated with MgOTetsu-to-Hagane, 1986