EFFECT OF COATING THICKNESS ON THE PROPERTIES OF TiN COATINGS DEPOSITED ON TOOL STEELS USING CATHODIC ARC PVD TECHNIQUE
Authors:
- 1 August 2008
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 15 (4) , 401-410
Abstract
Titanium nitride ( TiN ) widely used as hard coating material, was coated on tool steels, namely on high-speed steel (HSS) and D2 tool steel by physical vapor deposition method. The study concentrated on cathodic arc physical vapor deposition (CAPVD), a technique used for the deposition of hard coatings for tooling applications, and which has many advantages. The main drawback of this technique, however, is the formation of macrodroplets (MDs) during deposition, resulting in films with rougher morphology. Various standard characterization techniques and equipment, such as electron microscopy, atomic force microscopy, hardness testing machine, scratch tester, and pin-on-disc machine, were used to analyze and quantify the following properties and parameters: surface morphology, thickness, hardness, adhesion, and coefficient of friction (COF) of the deposited coatings. Surface morphology revealed that the MDs produced during the etching stage, protruded through the TiN film, resulting in film with deteriorated surface features. Both coating thickness and indentation loads influenced the hardness of the deposited coatings. The coatings deposited on HSS exhibit better adhesion compared to those on D2 tool steel. Standard deviation indicates that the coating deposited with thickness around 6.7 μm showed the most stable trend of COF versus sliding distance.Keywords
This publication has 17 references indexed in Scilit:
- An overview of the potential of quantitative coating adhesion measurement by scratch testingTribology International, 2006
- The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix compositesWear, 2001
- Review of the filtered vacuum arc process and materials depositionThin Solid Films, 2001
- Review of cathodic arc deposition technology at the start of the new millenniumSurface and Coatings Technology, 2000
- Tribo-layer formation during sliding wear of TiN coatingsWear, 2000
- Design of vacuum arc-based sourcesSurface and Coatings Technology, 1996
- Sliding wear behaviour of TiN coatings deposited by filtered arcSurface and Coatings Technology, 1994
- How to solve problems of films coated by ARC methodsSurface and Coatings Technology, 1992
- Microstructures of TiN films grown by various physical vapour deposition techniquesSurface and Coatings Technology, 1991
- The fracture of metalsProgress in Metal Physics, 1954