Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power
Open Access
- 1 May 2019
- journal article
- conference paper
- Published by AIP Publishing in AIP Advances
- Vol. 9 (5) , 055006
Abstract
The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices.Keywords
Funding Information
- Universitat Jaume I (UJI-A2016-08)
- Engineering and Physical Sciences Research Council (EP/L505006/1, EP/M506564/1, EP/M508081/1)
- Agencia Estatal de Investigación (RYC-2013-13970)
This publication has 26 references indexed in Scilit:
- Impedance spectroscopy for assessment of thermoelectric module properties under a practical operating temperatureEnergy, 2018
- Sintering trials of analogues of americium oxides for radioisotope power systemsJournal of Nuclear Materials, 2017
- Recent Joint Studies Related to the Development of Space Radioisotope Power SystemsE3S Web of Conferences, 2017
- Cerium neodymium oxide solid solution synthesis as a potential analogue for substoichiometric AmO 2 for radioisotope power systemsJournal of Nuclear Materials, 2017
- Spark plasma sintered bismuth telluride-based thermoelectric materials incorporating dispersed boron carbideJournal of Alloys and Compounds, 2015
- Impedance spectroscopy models for the complete characterization of thermoelectric materialsJournal of Applied Physics, 2014
- Neutron irradiation effects on metal-gallium nitride contactsJournal of Applied Physics, 2014
- Nuclear Power Sources: A Key Enabling Technology for Planetary ExplorationProceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2010
- Safe radioisotope thermoelectric generators and heat sources for space applicationsJournal of Nuclear Materials, 2008
- Mission interplanetary: Using radioisotope power to explore the solar systemEnergy Conversion and Management, 2008