Impact strength improvement of wood flour–recycled polypropylene composites
- 12 October 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (2) , 1074-1080
Abstract
In this research, the improvement of the impact strength of wood flour–recycled polypropylene (PP) composites through impact modification was studied. For this purpose, a virgin polypropylene (VPP) was thermomechanically degraded by five extrusions under controlled conditions in a twin‐screw extruder at a rotor speed of 100 rpm and a temperature of 190°C. PP (VPP and recycled PP at the second and fifth stages) and wood flour were compounded at 50 wt % wood flour loading in a counterrotating twin‐screw extruder in the presence different contents of ethylene vinyl acetate (EVA) to produce the wood flour–PP composites. From the results, the composites containing recycled PP exhibited significantly lower impact strengths. The addition of EVA up to 9 wt % increased the impact strengths of the composites made with PP recycled two and five times by about 63 and 41%, respectively. The composites containing VPP exhibited higher impact strengths than those containing recycled PP and EVA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012Keywords
This publication has 34 references indexed in Scilit:
- Effect of Thermomechanical Degradation of Polypropylene on Mechanical Properties of Wood-Polypropylene CompositesJournal of Composite Materials, 2009
- Morphology and properties of polypropylene/ethylene vinyl acetate copolymer/wood powder blend compositesExpress Polymer Letters, 2009
- Performance characterization of composite materials based on recycled high‐density polyethylene and ground tire rubber reinforced with short glass fibers for structural applicationsJournal of Applied Polymer Science, 2006
- Effect of the elastomer type on the microstructure and mechanical properties of polypropyleneJournal of Applied Polymer Science, 2005
- Blends of polypropylene resins with a liquid crystalline polymer. I. Isothermal crystallizationJournal of Applied Polymer Science, 2002
- Crystallization kinetics of polypropylene: 1. Effect of small additions of low-density polyethylenePolymer, 1996
- Thermal behaviour of polypropylene fractions: 2. The multiple melting peaksPolymer, 1993
- Melt flow index values and molecular weight distributions of commercial thermoplasticsJournal of Applied Polymer Science, 1990
- Melting behaviour of oriented isotactic polypropyleneThermochimica Acta, 1987
- Crystallization behaviour of fractions of isotactic polypropylene with different degrees of stereoregularityPolymer, 1983