Modeling and Prediction of Low-Frequency Near-Field Radiation for a Power Converter Based on the Operating Principle of a Monopole Antenna
- 12 August 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 14387-14397
Abstract
This article develops a model to predict the measured near-field radiation via a monopole antenna based on the test setups specified by the EMI standards such as CISPR 25, DO-160E, MIL-STD-461E. The article first identified a major near-field radiation source in a dc–dc power converter. The operation principle of the monopole antenna is then studied, and a model is developed to predict the output voltage of the antenna. Next, the transmission line effect in the EMI test setup is identified and its impact on the measured radiated EMI is modeled. A prediction technique is developed for the low-frequency near-field radiation. Finally, experiments validated the developed theory.Keywords
Funding Information
- Monolithic Power Systems, Inc.
This publication has 31 references indexed in Scilit:
- A Novel Low-Frequency Radiated Emissions Prediction Technique for the Inductor of a Non-Isolated Power Converter2022
- Electric Near Field Emission From a 1Mhz Power Converter For Electric Vehicles2021
- A Survey of Modeling and Reduction Techniques of Radiated EMI in Power Electronics2021
- Advances in Modeling and Reduction of Conducted and Radiated EMI in Non-isolated Power Converters2021
- Investigation of Noise Spectrum and Radiated EMI in High Switching Frequency Flyback Converters2021
- Advances of Modeling and Reduction of Conducted and Radiated EMI in Flyback Converters2020
- Investigation and Reduction of Near Electric Field Emitted from a Power Helical Inductor2020
- Investigation of Radiated EMI in Non-isolated Power Converters with Power Cables in Automotive Applications2019
- A simple method for predicting common-mode radiation from a cable attached to a conducting enclosure2002
- Characteristics of the wire biconical antenna used for EMC measurementsIEEE Transactions on Electromagnetic Compatibility, 1991