A Concise on the Effect of Calcium Oxide on the Properties of Alkali-Activated Materials: A Manual for Civil Engineers
Open Access
- 4 December 2023
- journal article
- review article
- Published by Springer Nature in International Journal of Concrete Structures and Materials
- Vol. 17 (1) , 1-20
Abstract
As known, calcium oxide (CaO) is an alkaline material, which can be used widely to increase the clay-containing soils load carrying capacity, to produce aerated concrete and calcium aluminate cement. In the last few years, introducing CaO into alkali-activated materials (AAMs) became a hot topic and attained more attention than other times. Generally, CaO can be incorporated into AAMs as an additive/a part of the main precursor and a sole activator without/with an auxiliary activator. Incorporating CaO into the matrices may improve some properties and worsen others. This mainly depends on the ratio of CaO, curing conditions, activator type and activator concentration, precursor type and testing age. This review collected, summarized and analyzed the available studies focused on the effect of CaO on the fresh (reaction kinetic, workability, setting time) and hardened (mechanical strength, durability and length change) properties of AAMs. In addition, some recommendations for future works were included. The results showed that the inclusion of CaO in AAMs decreased workability and setting time. In spite of there are contradictory results about the effect of CaO on the compressive strength of AAMs, most of them reported higher compressive strength, especially at the early ages. The incorporation of CaO up to 5% in the matrix is more effective than the incorporation of higher ratios. The inclusion of CaO in the matrix decreased water absorption, decreased total porosity, increased wetting/drying as well as acid attack resistivity. The CaO (5–10%) can be used as a sole activator for precursors. Auxiliary activators such as Al2(SO4)3, Na2CO3, Na2SiO3, Na2SO4, CaSO4, NaOH, Ca(NO3)2, NaNO3, Mg(NO3)2, Mg(HCOO)2, Ca(HCOO)2, SO3, gypsum and MgO can be used to enhance the compressive strength of CaO-activated materials, especially at the early ages.Keywords
This publication has 59 references indexed in Scilit:
- A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ashMaterials & Design (1980-2015), 2014
- A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – A guide for Civil EngineerConstruction and Building Materials, 2013
- Metakaolin as cementitious material: History, scours, production and composition – A comprehensive overviewConstruction and Building Materials, 2013
- Alkali-activated metakaolin: A short guide for civil Engineer – An overviewConstruction and Building Materials, 2013
- Hydration and properties of sodium sulfate activated slagCement and Concrete Composites, 2013
- Chemical and mechanical stability of sodium sulfate activated slag after exposure to elevated temperatureCement and Concrete Research, 2012
- A critical review on energy use and savings in the cement industriesRenewable and Sustainable Energy Reviews, 2011
- Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastesJournal of Hazardous Materials, 2009
- Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful productsJournal of Hazardous Materials, 2007
- The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cementsCement and Concrete Research, 2002