Cellulose Microfibers Isolated from Yucca Leaves: Structural, Chemical, and Thermal Properties
- 6 June 2022
- journal article
- research article
- Published by Taylor & Francis in Journal of Natural Fibers
- Vol. 19 (16) , 13120-13130
Abstract
The present study addressed the isolation of cellulose microfibers (CMF) from Yucca leaves using chemical treatments. This study was conducted in three stages, namely, two stages of alkaline treatments (NaOH 3%), and a single stage of bleaching treatment (H2O2 6%). The resulting microfibers were characterized using Scanning Electron Microscope (SEM), X-Ray diffraction (XRD), Fourier Transform Infra-red (FTIR), and Thermogravimetric Analysis (TGA). Alkaline and oxidative bleaching treatments had a positive impact on defibrillation and morphology of the fibers by the partial removal of non-cellulosic materials. FTIR results also revealed that most of the amorphous components were removed through proper alkali and bleaching treatments from the fibers. Further, SEM analysis showed that cellulose microfibers with an average diameter of 7 µm were successfully isolated with a yield of about 25%. The crystallinity index (76%) and crystallite size (3.41 nm) of CMF were also determined through the XRD analysis. The method used in this study led to the isolation of the microfibers with the thermal stability of 215°C and activation energy of 67.72 kJ/mol. The values obtained in this study were reasonably promising for the use of Yucca cellulose microfibers in various applications, such as reinforced-polymer manufacturing.Keywords
This publication has 49 references indexed in Scilit:
- Characterization of a novel natural cellulosic fiber from Prosopis juliflora barkCarbohydrate Polymers, 2013
- Preparation, morphology and structure of cellulose nanocrystals from bamboo fibersCellulose, 2012
- Effects of hydrolysis conditions on the morphology, crystallinity, and thermal stability of cellulose nanocrystals extracted from kenaf bast fibersCellulose, 2012
- Direct Fabrication ofall-Cellulose Nanocomposite from Cellulose Microfibers Using Ionic Liquid-Based NanoweldingBiomacromolecules, 2011
- Characterization of highly accessible cellulose microfibers generated by wet stirred media millingCarbohydrate Polymers, 2011
- Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performanceBiotechnology for Biofuels, 2010
- Isolation and characterization of nanofibers from agricultural residues – Wheat straw and soy hullsBioresource Technology, 2008
- Extraction of cellulose and preparation of nanocellulose from sisal fibersCellulose, 2007
- Chemical, structural, and thermal characterizations of alkali-soluble lignins and hemicelluloses, and cellulose from maize stems, rye straw, and rice strawPolymer Degradation and Stability, 2001
- An Empirical Method for Estimating the Degree of Crystallinity of Native Cellulose Using the X-Ray DiffractometerTextile Research Journal, 1959