Biomimetic adsorption intensification process of toxic metal ions based on dynamic compression-relaxation cycles of an elastic adsorbent

Authors:

Abstract
Main metal ion adsorbents are porous and non-elastic materials whose effluent diffusion is slow and requires the use of high pressures for efficient application in continuous processes. Inspired from the tunicates feeding mechanism, we used an elastic adsorbent, such as an open-cell melamine foam covered with a polydopamine coating, and applied automated dynamic compression-relaxation cycles (CRC) of this material within an aqueous solution of Pb(II) ions. We observed an intensification of the adsorption process compared with adsorption in a static mode, i.e. without adsorbent compression. This so-prepared material is robust to undergo both (i) various frequencies of CRC and (ii) different compression degrees, which are shown as two key parameters for optimizing the adsorption process. The elastic property of the adsorbent has been investigated through CRC to significantly accelerate successive adsorption and desorption steps. The desorption of Pb(II) ions was also achieved by CRC of the metal-loaded foam in a smaller volume of acidic solution than that of the foam, enabling the recovery of concentrated metal ion solutions. Furthermore, by comparison with static mode and using identical residence times, we showed that the intensification of metal ion adsorption is explained by an increase of the effluent convection within the foams, induced by the dynamic CRC. This metal ions adsorbent, whose specificities can be modulated by dynamic compression-relaxation cycles, represents a new class of material named "dynadsorbent", which could result in the design and development of original filtration devices with higher performance than those involving rigid adsorbents in a static mode.

This publication has 19 references indexed in Scilit: