Ethylene–propylene copolymers: Crystallinity, infrared, and creep studies
Authors:
- 1 November 1964
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 8 (6) , 2645-2651
Abstract
Density, infrared, and creep studies have been made of ethylene–propylene copolymers containing up to about 50 mole‐% propylene and their homopolymers. The degree of crystallinity (volume fraction of polyethylene crystals), as measured by density and x‐ray studies, decreases with increased propylene content. This change is also reflected in the intensity of the 13.7 μ band in the infrared spectra of the polymers. The measured amount of unsaturation (0.1–0.2%) in the copolymers is too small to account for the presence of several infrared bands which are often attributed to unsaturation. An unsaturation of 0.90% was obtained for a terpolymer where the third component was unsaturated. Indentation–creep studies showed the creep to be nearly proportional to the logarithm of time with a slope of 10% creep per decade for 0.1–10 min. Compliance–temperature graphs were found to be quite similar to those for the styrene–butadiene rubber SBR 1500.Keywords
This publication has 14 references indexed in Scilit:
- Determination of Propylene Copolymers by Infrared Spectrometry.Analytical Chemistry, 1963
- Crystallization and melting of copolymers of polymethylenePolymer, 1963
- The constitution of polypropylenes and ethylene-propylene copolymers, prepared with vanadyl-based catalystsPolymer, 1963
- Analysis and properties of ethylene–propylene copolymersJournal of Polymer Science, 1962
- The constitution of ethylene-propylene copolymersPolymer, 1961
- Infrared spectra of crystalline polymers from deuterated propylenesJournal of Polymer Science, 1960
- Infrared study of polypropyleneJournal of Applied Polymer Science, 1960
- Determination of Hydrocarbon Functional Groups by Infrared SpectroscopyAnalytical Chemistry, 1952
- Determination of Unsaturation of Butyl Rubbers and Certain Branched Olefins. Iodine Monochloride MethodRubber Chemistry and Technology, 1951
- Density Measurements on Synthetic RubbersRubber Chemistry and Technology, 1943