Copper recovery from nickel laterite with high‐iron content: A continuous process from mining waste
- 13 October 2019
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 98 (4) , 957-968
Abstract
The waste product from the hydrometallurgical processing of nickel laterite ores can contain valuable metals, making their recovery economically viable. However, the high‐impurities content, mainly iron, makes the process technically unfeasible. As a result, the separation of metals from the leach solution must be selective. Among the techniques available, the use of chelating resin is advantageous due to its selectivity and low energy consumption. Among the commercial chelating resins available, Dowex XUS 43605 has been shown to be highly selective for copper and can be used with a high impurities content. Although there are studies on the use of Dowex XUS 43605, none have evaluated a high impurities content and modelled a continuous process. For this reason, the aim of this work was to investigate copper recovery by a continuous process. The Dowex XUS 43605 chelating resin with HPPA functional group was used in ion‐exchange experiments. Column experiments were performed in two steps: loading (to recover copper) and elution (to obtain a copper‐rich solution). The removal of iron and the subsequent collection of copper were possible in a precipitation step using CaCO3. The results showed that the solution obtained from elution had a copper concentration that was 10 times higher than in the loading. All of the iron was removed from the elution solution at pH 3.5 with 5% of copper losses. Copper precipitation was possible at pH 5.5. From the results obtained, a proposed flowsheet for recovering copper was suggested.Keywords
Funding Information
- Fundação de Amparo à Pesquisa do Estado de São Paulo (2012/51871 9, 2016/05527‐5)
This publication has 38 references indexed in Scilit:
- Characterisation of iron-rich precipitates from synthetic atmospheric nickel laterite leach solutionsMinerals Engineering, 2013
- Efficient separation and high selectivity for nickel from cobalt-solution by a novel chelating resin: Batch, column and competition investigationChemical Engineering Journal, 2012
- The use of the chelating resin of a new generation Lewatit MonoPlus TP-220 with the bis-picolylamine functional groups in the removal of selected metal ions from acidic solutionsChemical Engineering Journal, 2012
- Interaction mechanism of aqueous heavy metals onto a newly synthesized IDA-chelating resin: Isotherms, thermodynamics and kineticsChemical Engineering Journal, 2011
- The effect of iron precipitation upon nickel losses from synthetic atmospheric nickel laterite leach solutions: Statistical analysis and modellingHydrometallurgy, 2011
- Global trends and environmental issues in nickel mining: Sulfides versus lateritesOre Geology Reviews, 2010
- Comparative study of chelating ion exchange resins for the recovery of nickel and cobalt from laterite leach tailingsHydrometallurgy, 2009
- Ion-exchange kinetics of Cu(II) and Zn(II) from aqueous solutions with two chelating resinsChemical Engineering Journal, 2007
- Competitive adsorption of Pb2+, Cu2+, and Cd2+ ions on microporous titanosilicate ETS-10Journal of Colloid and Interface Science, 2005
- Heavy metals in wastewater: Modelling the hydroxide precipitation of copper(II) from wastewater using lime as the precipitantWaste Management, 1996