Quantitative analysis of retained austenite in Nb added Fe-based alloy
Open Access
- 18 June 2022
- journal article
- research article
- Published by Springer Nature in Applied Microscopy
- Vol. 52 (1) , 1-10
Abstract
The use of Pipelines for long-distance transportation of crude oil, natural gas and similar applications is increasing and has pivotal importance in recent times. High specific strength plays a crucial role in improving transport efficiency through increased pressure and improved laying efficiency through reduced diameter and weight of line pipes. TRIP-based high-strength and high-ductility alloys comprise a mixture of ferrite, bainite, and retained austenite that provide excellent mechanical properties such as dimensional stability, fatigue strength, and impact toughness. This study performs microstructure analysis using both Nital etching and LePera etching methods. At the time of Nital etching, it is difficult to distinctly observe second phase. However, using LePera etching conditions it is possible to distinctly measure the M/A phase and ferrite matrix. The fraction measurement was done using OM and SEM images which give similar results for the average volume fraction of the phases. Although it is possible to distinguish the M/A phase from the SEM image of the sample subjected to LePera etching. However, using Nital etching is nearly impossible. Nital etching is good at specific phase analysis than LePera etching when using SEM images.Keywords
All Related Versions
Funding Information
- National Research Foundation of Korea (2021R1A2C4002622)
- Korean Institute of Materials Science (PNK8730)
This publication has 11 references indexed in Scilit:
- New Development of High Grade X80 to X120 Pipeline SteelsMaterials and Manufacturing Processes, 2011
- Strength–hardness statistical correlation in API X65 steelMaterials Science and Engineering: A, 2011
- New low carbon Q&P steels containing film-like intercritical ferriteMaterials Science and Engineering: A, 2010
- Characterization of the microstructure obtained by the quenching and partitioning process in a low-carbon steelMaterials Characterization, 2008
- Martensite in steel: strength and structureMaterials Science and Engineering: A, 1999
- Effect of phosphorus on the formation of retained austenite and mechanical properties in Si-containing low-carbon steel sheetMetallurgical Transactions A, 1989
- Enhancement of elongation by retained austenite in intercritical annealed 0.4C-1.5Si-0.8Mn steel.Transactions of the Iron and Steel Institute of Japan, 1987
- Improved etching technique for the determination of percent martensite in high-strength dual-phase steelsMetallography, 1979
- Thermodynamics and phase diagram of the Fe-C systemMetallurgical Transactions, 1972
- La formation de la ferrite proeutectoïde dans les aciers au carboneRevue de Métallurgie, 1958