Design and operation of a sequentially-fired pulse forming network for non-linear loads
Authors:
- 12 December 2005
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 33 (6) , 2060-2065
Abstract
While the construction of a linear pulse forming network (PFN) for a constant load impedance is relatively easy, the process is more difficult for a nonlinear or time-varying load. A passive PFN can certainly be synthesized for nonlinear loads, but is usually large and lacks the flexibility to be truly useful in most practical and research applications. This investigation describes the design and construction of a sequentially-fired pulse forming network (SFPFN) that maintains constant voltage and current for a nonlinear load. Operation of the SFPFN consists of charging multiple capacitor banks (or modules) to various levels and sequentially firing these banks into the load at appropriate times. The load and its characteristics determine the module charge voltage. An added benefit with the SFPFN is real-time computer monitoring and control allowing the PFN modules to be charged from a single prime power source via a group of switching relays. The nonlinear load used in this investigation is a helical coil electromagnetic launcher (HCEL). The SFPFN is also tested with a linear load consisting of a pulsed field coil. The nonlinearity of the HCEL is well-known with a factor of 2 change in winding resistance due to joule heating and a large variation in terminal voltage due to changes in the armature back-voltage. Experimental measurements show the SFPFN can deliver a relatively constant current pulse on the order of 5-15 kA into the HCEL load for a pulse length up to 8 ms. The maximum SFPFN operating voltage is 900 V with a total stored energy of 125 kJ. Scaling the SFPFN to larger or smaller pulse amplitudes or lengths is possible.Keywords
This publication has 9 references indexed in Scilit:
- Capacitor-based multiple-module sequentially-fired pulse forming network for nonlinear loads2004
- Synthesized pulse forming networks for long pulse high duty cycle magnetron or other type loads2003
- A compact pulse forming network, based on semiconducting switches, for electric gun applicationsIEEE Transactions on Magnetics, 1999
- Pulse forming network optimal design for the power supply of EML launchersIEEE Transactions on Magnetics, 1997
- Pulsed power for electric gunsIEEE Transactions on Magnetics, 1997
- Experiments with the Green Farm electric gun facilityIEEE Transactions on Magnetics, 1995
- Compact 50 kJ pulse forming unit, switched by semiconductorsIEEE Transactions on Magnetics, 1995
- The Kirkcudbright Electromagnetic Launch FacilityIEEE Transactions on Magnetics, 1993
- Thunderbolt (railguns)IEEE Transactions on Magnetics, 1991