Uniaxial behaviour of confined high-strength concrete-filled-steel-tube columns
Authors:
- 1 September 2014
- journal article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 167 (9) , 520-533
Abstract
High-strength concrete (HSC) columns are usually provided with heavy confining steel within the potential plastic hinge region to restore flexural ductility. However, as the effectiveness of confining steel decreases with the concrete strength, the required confining steel content for high-strength concrete columns becomes very large, which causes steel congestion in the proximity of beam–column joints. A better method is to adopt a concrete-filled-steel-tube (CFST) column, which uses a hollow steel tube to confine high-strength concrete. Compared with ordinary reinforcement, concrete-filled-steel-tube columns provide a more uniform confining pressure to the concrete core and reduce steel congestion. Nonetheless, a major shortcoming of concrete-filled-steel-tube columns is that the imperfect interface bonding occurs at the elastic stage as steel dilates more than concrete in compression. This adversely affects the confinement of the steel tube and decreases the elastic strength and modulus. To resolve the problem, it is proposed in this study to use external steel confinement in the forms of rings and ties to restrict the dilation of the steel tube. For verification, a series of uniaxial compression tests on externally confined concrete-filled-steel-tube columns was performed. Theoretical models for predicting the uniaxial load-carrying capacity of ring-confined concrete-filled-steel-tube columns were also developed.Keywords
This publication has 25 references indexed in Scilit:
- Performance and calculations of concrete filled steel tubes (CFST) under axial tensionJournal of Constructional Steel Research, 2011
- Limited ductility design of reinforced concrete columns for tall buildings in low to moderate seismicity regionsThe Structural Design of Tall and Special Buildings, 2011
- Numerical modelling of the axial compressive behaviour of short concrete-filled elliptical steel columnsJournal of Constructional Steel Research, 2010
- Axial load behaviour of concrete-filled steel tubular columnsProceedings of the Institution of Civil Engineers - Structures and Buildings, 2007
- Tests and calculations for hollow structural steel (HSS) stub columns filled with self-consolidating concrete (SCC)Journal of Constructional Steel Research, 2005
- Axial capacity of circular concrete-filled tube columnsJournal of Constructional Steel Research, 2004
- On poisson's ratio and volumetric strain in concreteInternational Journal of Fracture, 2004
- Inelastic design of low-axially loaded high-strength reinforced concrete columnsEngineering Structures, 2003
- Concrete-Filled Hollow Structural Steel Columns after Exposure to ISO-834 Fire StandardJournal of Structural Engineering, 2003
- High‐Strength Concrete Columns Confined by Rectangular TiesJournal of Structural Engineering, 1994