Methods to Increase the Fatigue Life of Friction Stir Lap Welds in No-load Transfer Coupons Using a Retractable Pin Tool
Authors:
- 1 May 2012
- journal article
- research article
- Published by ASTM International in Journal of ASTM International
- Vol. 9 (5) , 1-16
Abstract
The purpose of this study was to obtain a better understanding of crack initiation at friction stir weld exit holes in no-load transfer coupons as a first-order approximation of the potential performance of friction stir welding (FSW) joints employed for aircraft fuselage applications. In order to meet this goal, the effects of weld exit location on fatigue life in discontinuous friction stir lap-welded panels were documented. Sheets of aluminum alloys 7075-T6 and 2024-T3 were chosen for the FSW lap welds. Constant amplitude fatigue tests were carried out in order to determine the effect of various welding scenarios on fatigue crack initiation. A number of weld exit strategies were investigated, as well as another FSW tool design called a retractable pin tool (RPT). This tool was shown to eliminate the exit hole and reduce the stress concentration around the weld exit location. Prior to this work, none of the attempted exit strategies was found to delay or eliminate the initiation of fatigue cracks at the exit holes of discontinuous FSW lap welds. Only by using the RPT, which is able to eliminate the exit hole completely, was it possible to produce fatigue life results in coupons with a tool extraction zone that were comparable to those in baseline coupons containing no extraction zone.Keywords
This publication has 4 references indexed in Scilit:
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- Fatigue Crack Growth in Integrally Stiffened Panels Joined Using Friction Stir Welding and Swept Friction Stir Spot WeldingJournal of ASTM International, 2008
- Fatigue properties of friction stir overlap weldsInternational Journal of Fatigue, 2007
- Static Strength Comparison of Riveted versus Friction Stir Welded Stiffened Panels2006