Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Polímeros
- Vol. 29 (3)
Abstract
This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in fabricating composites using hand layup technique. Three different composites i.e. Plain BF + matrix with no filler particles, BF + matrix with 10 wt, % moringa ash and BF + matrix with 10 wt, % bagasse ash were fabricated and tested according to the ASTM standards to determine the mechanical properties and chemical corrosion resistance. According to the experimental test results, the composites with moringa ash inclusion showed better properties than the bagasse ash inclusion and with no filler added composites.Keywords
This publication has 26 references indexed in Scilit:
- Bagasse filled recycled polyethylene bio-composites: Morphological and mechanical properties studyResults in Physics, 2013
- Recycling of sugarcane bagasse ash waste in the production of clay bricksJournal of Environmental Management, 2012
- Strengthening of basalt fibers with nano-SiO2–epoxy composite coatingMaterials & Design (1980-2015), 2011
- Novel toughened polylactic acid nanocomposite: Mechanical, thermal and morphological propertiesMaterials & Design (1980-2015), 2010
- Coir-fiber-based fire retardant nano filler for epoxy compositesJournal of Thermal Analysis and Calorimetry, 2010
- Mechanical Properties of Glass-Fiber Reinforced Epoxy Composites Filled with Al 2O3 ParticlesJournal of Reinforced Plastics and Composites, 2008
- Agricultural residues as precursors for activated carbon production—A reviewRenewable and Sustainable Energy Reviews, 2007
- Environmental fatigue of unidirectional glass–carbon fiber reinforced hybrid compositeComposites Part B: Engineering, 2001
- Aging of polymeric composite specimens for 5000 hours at elevated pressure and temperatureComposites Science and Technology, 2001
- Acid corrosion analysis of fibre glassJournal of Materials Science, 1991