In situ microscopy for on-line determination of biomass
Authors:
- 5 October 1998
- journal article
- research article
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 60 (1) , 24-35
Abstract
A sensor is presented, which allows on-line microscopic observation of microorganisms during fermentations in bioreactors. This sensor, an In Situ Microscope (ISM) consists of a direct-light microscope with a measuring chamber, integrated in a 25 mm stainless steel tube, two CCD-cameras, and two frame-grabbers. The data obtained are processed by an automatic image analysis system. The ISM is connected with the bioreactor via a standard port, and it is immersed directly in the culture liquid—in our case Saccharomyces cerevisiae in a synthetic medium. The microscopic examination of the liquid is performed in the measuring chamber, which is situated near the front end of the sensor head. The measuring chamber is opened and closed periodically. In the open state, the liquid in the bioreactor flows unrestricted through the chamber. In closing, a defined volume of 2,2 · 10−8 mL of the liquid becomes enclosed. After a few seconds, when the movement of the cells in the enclosed culture has stopped, they are examined with the microscope. The microscopic images of the cells are registered with the CCD-cameras and are visualized on a monitor, allowing a direct view of the cell population. After detection, the measuring chamber reopens, and the enclosed liquid is released. The images obtained are evaluated as to cell concentration, cell size, cell volume, biomass, and other relevant parameters simultaneously by automatic image analysis. With a PC (486/33 MHz), image processing takes about 15 s per image. The detection range tested when measuring cells of S. cerevisiae is about 106 to 109 cells/mL (equivalent to a biomass of 0.01 g/L to 12 g/L). The calculated biomass values correlate very well with those obtained using dry weight analysis. Furthermore, histograms can be calculated, which are comparable to those obtained by flow cytometry. © 1998 John Wiley & Sons, Inc. Biotechnol Bioeng 60: 24–35, 1998.Keywords
This publication has 12 references indexed in Scilit:
- Applications of image analysis in cell technologyCurrent Opinion in Biotechnology, 1996
- In situ microscopy for on‐line characterization of cell‐populations in bioreactors, including cell‐concentration measurements by depth from focusBiotechnology and Bioengineering, 1995
- Morphological characterization of yeast by image analysisBiotechnology and Bioengineering, 1993
- Biomass determinationJournal of Biotechnology, 1992
- Estimation of cell volume and biomass of penicillium chrysogenum using image analysisBiotechnology and Bioengineering, 1992
- A computer‐aided measuring system for the characterization of yeast populations combining 2D‐image analysis, electronic particle counter, and flow cytometryBiotechnology and Bioengineering, 1992
- Bioanalytik1991
- Cell volume measurement as an estimation of mammalian cell biomassBiotechnology and Bioengineering, 1990
- Flow cytometric studies during culture of Saccharomyces cerevisiaeEnzyme and Microbial Technology, 1987
- The estimation of microbial biomassBiosensors, 1985