Performance Evaluation of WMA Containing Re-Refined Acidic Sludge and Amorphous Poly Alpha Olefin (APAO)
Open Access
- 17 March 2021
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 13 (6) , 3315
Abstract
The use of waste materials has been increasingly conceived as a sustainable alternative to conventional materials in the road construction industry, as concerns have arisen from the uncontrolled exploitation of natural resources in recent years. Re-refined acidic sludge (RAS) obtained from a waste material—acidic sludge—is an alternative source for bitumen. This study’s primary purpose is to evaluate the resistance of warm mix asphalt (WMA) mixtures containing RAS and a polymeric additive against moisture damage and rutting. The modified bitumen studied in this research is a mixture of virgin bitumen 60/70, RAS (10, 20, and 30%), and amorphous poly alpha olefin (APAO) polymer. To this end, Marshall test, moisture susceptibility tests (i.e., tensile strength ratio (TSR), residual Marshall, and Texas boiling water), resilient modulus, and rutting assessment tests (i.e., dynamic creep, Marshall quotient, and Kim) were carried out. The results showed superior values for modified mixtures compared to the control mix considering the Marshall test. Moreover, the probability of a reduction in mixes’ moisture damage was proved by moisture sensitivity tests. The results showed that modified mixtures could improve asphalt mixtures’ permanent deformation resistance and its resilience modulus. Asphalt mixtures containing 20% RAS (substitute for bitumen) showed a better performance in all the experiments among the samples tested.Keywords
This publication has 39 references indexed in Scilit:
- Recycling of Waste Engine Oils Using a New Washing AgentEnergies, 2013
- Waste management, waste resource facilities and waste conversion processesEnergy Conversion and Management, 2011
- A New Static Strength Test for Characterization of Rutting of Dense-Graded Asphalt MixturesJournal of Testing and Evaluation, 2011
- A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep testConstruction and Building Materials, 2009
- Framework for developing a static strength test for measuring deformation resistance of asphalt concrete mixturesConstruction and Building Materials, 2007
- Environmental aspect of storage of acid tars and their utilization in commercial petroleum products (Review)Petroleum Chemistry, 2007
- Superhydrophobic surfacesCurrent Opinion in Colloid & Interface Science, 2006
- Waste Oil Recycling Using Mixtures of Polar SolventsIndustrial & Engineering Chemistry Research, 2005
- Regeneration of Used Lubricant Oil by Polar Solvent ExtractionIndustrial & Engineering Chemistry Research, 2005
- Feasibility of Deformation Strength for Estimation of Rut Resistance of Asphalt ConcreteRoad Materials and Pavement Design, 2004