Effect of Stress Aging on Strength, Toughness and Corrosion Resistance of Al-10Zn-3Mg-3Cu Alloy
Open Access
Abstract
The 7000 series aluminum alloy represented by Al-Zn-Mg-Cu has good strength and toughness and is widely used in the aerospace field. However, its high Zn content results in poor corrosion resistance, limiting its application in other fields. In order to achieve the synergistic improvement of both strength and corrosion resistance, this study examines the response of strength, toughness and corrosion resistance of a high-strength aluminum alloy tail frame under aging conditions with external stresses of 135 MPa, 270 MPa and 450 MPa. The results show that with the increase in the external stress level, the strength of the alloy improves, while its corrosion resistance decreases. An optimal balance of strength, toughness and corrosion resistance is achieved at the conditions of 270 MPa-120–24 h. This phenomenon can be attributed to two main factors: first, lattice defects such as vacancy and dislocation are introduced into the stress aging process. The introduction of a vacancy makes it easier for neighboring solute atoms to migrate there. This makes the crystal precipitates more dispersed. Also, the number of precipitates in the matrix increases from 2650 to 3117, and the size is refined from 2.96 nm to 2.64 nm. At the same time, the dislocation entanglement within the crystal structure promotes the dislocation strengthening mechanism and promotes the solute atoms to have enough channels for migration. Since too many dislocations can cause the crystal to become brittle and thus reduce its strength, entangled dislocations hinder the movement of the dislocations, thereby increasing the strength of the alloy. Secondly, under the action of external force, the precipitated phase is discontinuous, which hinders the corrosion expansion at the grain boundary, thus improving the corrosion resistance of the alloy. At low-stress states, the binding force of vacancy is stronger, the precipitation free zone (PFZ) is significantly inhibited, and the intermittent distribution effect of intergranular precipitates is the most obvious. As a result, the self-corrosion current decreases from 1.508 × 10−4 A∙cm−2 in the non-stress state to 1.999 × 10−5 A∙cm−2, representing an order of magnitude improvement. Additionally, the maximum depth of intergranular corrosion is reduced from 274.9 μm in the non-stress state to 237.7 μm.Keywords
Funding Information
- Taishan Industrial Innovation Leading Talent Project (52205427, SDCX-ZG-202203072, 2023JMRH0302)
- National Natural Science Foundation of China (52205427, SDCX-ZG-202203072, 2023JMRH0302)
- Shandong Postdoctoral Innovation Project (52205427, SDCX-ZG-202203072, 2023JMRH0302)
- Key Research and Development plan in Shandong Province (52205427, SDCX-ZG-202203072, 2023JMRH0302)
This publication has 52 references indexed in Scilit:
- Effect of Variable Rate Non-isothermal Aging on the Microstructure and Properties of Al-Zn-Mg-Cu AlloyJOM, 2024
- Regulation mechanism of aging behavior and mechanical properties of 2195-T34 Al-Li alloy at different stress levelsJournal of Central South University, 2024
- Influence of Zn Content on Microstructures, Mechanical Properties and Stress Corrosion Behavior of AA5083 Aluminum AlloyActa Metallurgica Sinica (English Letters), 2020
- Relation Between Zn Additions, Microstructure and Corrosion Behavior of New Wrought Mg-5Al AlloysMetals and Materials International, 2019
- Assessment of hydrogen embrittlement via image-based techniques in Al–Zn–Mg–Cu aluminum alloysActa Materialia, 2019
- Experimental and DFT characterization of η′ nano-phase and its interfaces in Al Zn Mg Cu alloysActa Materialia, 2019
- Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsionActa Materialia, 2019
- The effect of quench rate and overageing temper on the corrosion behaviour of AA7050Corrosion Science, 2014
- Correlations between stress corrosion cracking susceptibility and grain boundary microstructures for an Al–Zn–Mg alloyCorrosion Science, 2013
- Correlations between intergranular stress corrosion cracking, grain-boundary microchemistry, and grain-boundary electrochemistry for Al–Zn–Mg–Cu alloysCorrosion Science, 2010