Development of the Low-Pressure Die Casting Process for an Aluminium Alloy Part
Open Access
Abstract
The low-pressure die casting (LPDC) process was experimentally and numerically studied to produce AlSi7Mg0.3 components such as steering knuckles. Steering knuckles are important safety components in the context of a vehicle’s suspension system, serving as the mechanical interface that facilitates the articulation of the steering to control the front wheel’s orientation, while simultaneously bearing the vertical load imposed by the vehicle’s weight. This work focuses on the development of a numerical model in ProCAST®, replicating the production of the aforementioned part. The model analyses parameters such as the filling dynamics, solidification process, and presence of shrinkage porosities. For the purpose of evaluating the quality of the castings, six parts were produced and characterised, both mechanically (tensile and hardness tests) and microstructurally (porosity and optical microscopy analysis). When correlating simulation results with the available experimental data, it is possible to conclude that the usage of the LPDC process is a viable alternative to the use of steels and other metals for the production of very high-quality castings while using lighter alloys such as aluminium and magnesium in more demanding applications.Keywords
Funding Information
- AM2R-Agenda Mobilizadora para a inovação empresarial do setor das Duas Rodas (02-C05-i01.01-2022.PC644866475-00000012)
This publication has 35 references indexed in Scilit:
- Effect of Shrinkage Versus Hydrogen Pores on Fatigue Life of Cast AlSi11Mg AlloyInternational Journal of Metalcasting, 2024
- Multifunctional Ceramic Filter Systems for Metal Melt Filtration2024
- A Review on Porosity Formation in Aluminum-Based AlloysMaterials, 2023
- Eutectic Modification of Al-Si Alloys by Using AlSr102022
- Failure analysis of truck steering knuckleEngineering Failure Analysis, 2022
- Design and Weight Optimization of Critical Automobile Component-Steering Knuckle2021
- Effects of Axial and Multiaxial Variable Amplitude Loading Conditions on the Fatigue Life Assessment of Automotive Steering KnuckleJournal of Failure Analysis and Prevention, 2020
- Multiaxial fatigue assessment for automotive safety components of cast aluminium EN AC-42000 T6 (G-AlSi7Mg0.3 T6) under constant and variable amplitude loadingInternational Journal of Fatigue, 2017
- Casting2015
- End-to-End Simulation of Casting and Metal-Forming Operations with ProCAST and Qform SoftwareMetallurgist, 2014