Electronic Band Offset Determination of Oxides Grown by Atomic Layer Deposition on Silicon
- 11 July 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (5) , 682-690
Abstract
Minimizing electrical losses at metal/silicon interfaces in high-efficiency single-junction silicon solar cells requires the use of carrier-selective passivating contacts. The electronic barrier heights at the insulator/silicon interface are necessary for calculating the probability of quantum tunneling of charge carriers at these interfaces. Thus, precise knowledge of these parameters is crucial for the development of contact schemes. Using a photoemission-based method, we experimentally determine the electronic band offsets of Al 2 O 3 , HfO 2 and SiO 2 layers grown by atomic layer deposition (ALD) on silicon. For Al 2 O 3 /Si, we determine a valence band offset (Δ EV ) and conduction band offset (Δ EC ) of 3.29 ± 0.07 eV and 2.24 ± 0.13 eV, respectively. For HfO 2 /Si, Δ EV and Δ EC are determined as 2.67 ± 0.07 eV and 1.81 ± 0.21 eV, while for SiO 2 /Si, Δ EV and Δ EC are 4.87 ± 0.07 eV and 2.61 ± 0.12 eV, respectively. Using technology computer-aided design simulations, we incorporate our experimental results to estimate the contact resistivity that would be attained at various dielectric layer thicknesses. We find that for achieving the 100 mΩ·cm 2 contact resistivity benchmark, Al 2 O 3 layers should be no thicker than 1.65 nm for a p -type polysilicon-based hole-selective contact, assuming hole tunneling masses taken from the literature. Correspondingly, for HfO 2 and SiO 2 , an upper limit of 1.4 nm is determined as the thickness threshold in order to utilize these ALD-grown layers for contacts in high-performance silicon photovoltaics.Keywords
Funding Information
- Engineering and Physical Sciences Research Council (EP/R513374/1)
- Engineering and Physical Sciences Research Council
- Funded Warwick Analytical Science (EP/V007688/1)
- Engineering and Physical Sciences Research Council
- Charged Oxide Inversion Layer (EP/V037749/1)
- Leverhulme Trust (RPG-2020-377)
- German Federal Ministry for Economic Affairs and Climate Action (03EE1031A, 03EE1031B (PaSoDoble))
This publication has 56 references indexed in Scilit:
- Graphene as transparent electrode for direct observation of hole photoemission from silicon to oxideApplied Physics Letters, 2013
- Controlling the fixed charge and passivation properties of Si(100)/Al2O3 interfaces using ultrathin SiO2 interlayers synthesized by atomic layer depositionJournal of Applied Physics, 2011
- Energy-band parameters of atomic-layer-deposition Al2O3∕InGaAs heterostructureApplied Physics Letters, 2006
- Modeling of Tunneling Current and Gate Dielectric Reliability for Nonvolatile Memory DevicesIEEE Transactions on Device and Materials Reliability, 2004
- Internal photoemission of electrons and holes from (100)Si into HfO2Applied Physics Letters, 2002
- Modeling CMOS tunneling currents through ultrathin gate oxide due to conduction- and valence-band electron and hole tunnelingIEEE Transactions on Electron Devices, 2001
- Electron energy barriers between (100)Si and ultrathin stacks of SiO2, Al2O3, and ZrO2 insulatorsApplied Physics Letters, 2001
- Band discontinuities at epitaxial SrTiO3/Si(001) heterojunctionsApplied Physics Letters, 2000
- Band offsets of wide-band-gap oxides and implications for future electronic devicesJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2000
- Semiconductor core-level to valence-band maximum binding-energy differences: Precise determination by x-ray photoelectron spectroscopyPhysical Review B, 1983